SHOME-143 - Detector Steren - Free user manual and instructions
Find the device manual for free SHOME-143 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wall scanner / multi detector |
| Brand | Steren |
| Model | SHOME-143 |
| Product category | Detector |
| Detection modes | Wood studs, metal pipes, live AC wires |
| Maximum detection depth | 3/4 in (19 mm) |
| Display | LCD with backlight |
| Audio/visual alerts | Yes (buzzer and LED) |
| Automatic calibration | One-touch calibration |
| Power source | 9V battery (not included) |
| Battery life | Approx. 20 hours continuous use |
| Auto power off | After 3 minutes of inactivity |
| Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Dimensions (W x H x D) | 2.7 x 6.0 x 1.2 in (68 x 152 x 30 mm) |
| Weight | 5.3 oz (150 g) |
| Material | Durable ABS plastic |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Safety | For indoor use; not for life safety |
| Spare parts and repairability | No user-serviceable parts; contact Steren support |
| Warranty | 1 year limited |
Frequently Asked Questions - SHOME-143 Steren
How does the SHOME-143 detect objects behind walls?
The SHOME-143 uses electronic sensors to detect changes in density, metallic properties, and electric fields. It can locate wood studs, metal pipes, and live AC wires behind drywall.
How do I change the battery?
Slide the battery compartment cover located on the back of the device. Insert a new 9V battery (not included) and snap the connector. Replace the cover before use.
Why does my detector give inconsistent readings?
Inconsistent readings often occur when the device is not properly calibrated on a flat surface. Always perform one-touch calibration by placing the unit flat on the wall and holding the button until it beeps. Also avoid using near thick or uneven surfaces.
Can it detect live wires behind concrete?
The detection depth is limited to 3/4 inch (19 mm). Concrete attenuates the signal, so detection may be unreliable on plaster or thick concrete. It works best on standard drywall.
What is the accuracy of stud detection?
When properly calibrated, the stud detection is accurate to within ±1/8 inch (3 mm). Always mark the edges of the stud for a more accurate location.
Does it have an auto power-off feature?
Yes, the SHOME-143 automatically powers off after 3 minutes of inactivity to conserve battery life.
How deep can it detect metal objects?
For a 1-inch nail or screw, maximum detection is about 3/4 inch (19 mm) behind drywall. Larger metal pipes may be detected at a slightly greater depth, but depth varies with size.
How should I clean and maintain the detector?
Clean the housing with a soft dry cloth. Do not use water or chemical solvents. Keep the sensor area free of debris and store the device in a dry place.
Is the SHOME-143 suitable for professional use?
It is designed for home DIY and light professional use. For heavy continuous professional use, consider a more advanced model. Regular calibration and proper technique are essential.
What is the warranty period?
Steren offers a 1-year limited warranty against manufacturing defects. Keep your purchase receipt and contact Steren technical support for service.
User questions about SHOME-143 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual SHOME-143 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHOME-143 by Steren.
USER MANUAL SHOME-143 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : SHOME-143
Category : Detector