56404 - Drill Draper - Free user manual and instructions
Find the device manual for free 56404 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Electric drill |
| Brand | Draper |
| Model | 56404 |
| Power source | AC mains |
| Rated voltage | 230 V |
| Rated power | 710 W |
| Chuck type | Keyed |
| Chuck size | 13 mm |
| No-load speed | 0–3000 min⁻¹ |
| Drilling capacity in wood | 32 mm |
| Drilling capacity in metal | 13 mm |
| Variable speed | Yes |
| Reverse function | Yes |
| Impact function | Yes |
| Impact rate | 0–48000 bpm |
| Auxiliary handle | Included |
| Depth gauge | Included |
| Weight | 1.9 kg |
| Cable length | 2.5 m |
| Safety features | Double insulated, CE approved |
| Maintenance | Keep ventilation slots clear |
| Cleaning | Wipe with dry cloth |
| Spare parts | Available from Draper |
| Warranty | 2 years |
Frequently Asked Questions - 56404 Draper
How do I change the drill bit?
To change the drill bit, first unplug the tool. Use the key to loosen the chuck, insert the bit, then tighten securely with the key. Always ensure the bit is centered.
Can this drill be used on masonry?
Yes, when the impact function is engaged. Use a carbide-tipped masonry bit and apply moderate pressure. The impact rate reaches up to 48000 bpm for efficient drilling.
What safety precautions should I take?
Always wear protective glasses and gloves. Keep the power cord away from the drilling area. Use the auxiliary handle for better control and ensure the workpiece is clamped securely.
How do I adjust the speed?
The speed is controlled by the trigger pressure. For precise starts, apply light pressure. The variable speed range is 0–3000 min⁻¹, allowing low speed for pilot holes and high speed for larger bits.
How do I reverse the direction?
Use the forward/reverse switch located above the trigger. Set it to reverse position to remove screws or back out a stuck bit. Make sure the motor has fully stopped before switching.
How do I clean and maintain the drill?
After use, wipe the exterior with a dry cloth. Keep the ventilation slots free of dust and debris. Periodically apply a drop of oil to the chuck to keep it smooth.
What is the maximum drilling capacity?
The drill can bore up to 32 mm in wood and 13 mm in metal. For masonry, use a suitable bit and the impact mode.
Why is the drill smoking?
Smoking can occur if the motor is overloaded or if the ventilation slots are blocked. Stop immediately, unplug the tool, and let it cool. Clear any obstructions and avoid excessive pressure.
Can the drill be used with a stand?
Yes, the drill can be mounted in a drill stand if the stand fits the 43 mm collar. This is ideal for precise perpendicular holes. Ensure the drill is secured properly.
How do I replace the carbon brushes?
Carbon brushes are wear parts. When sparking increases or the drill loses power, replace them. Unscrew the brush caps on the side of the motor, remove the worn brushes, and insert new ones. Keep the brushes clean and aligned.
User questions about 56404 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 56404 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 56404 by Draper.
USER MANUAL 56404 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 56404
Category : Drill