WB 09 - Speaker Stand DB Technologies - Free user manual and instructions
Find the device manual for free WB 09 DB Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | DB Technologies |
| Model | WB 09 |
| Product Type | Speaker Stand |
| Material | Steel |
| Height Adjustment Range | 0.95 m - 1.80 m |
| Maximum Load Capacity | 25 kg |
| Weight | 2.4 kg |
| Base Shape | Cross-shaped |
| Tube Diameter | 35 mm |
| Finish | Powder-coated black |
| Adjustment Mechanism | Push-pin and clamp |
| Safety Features | Locking pin, rubber cap |
| Rubber Feet | Yes, non-slip pads |
| Compatible With | Speakers with 35 mm pole socket |
| Assembly | Tool-free, quick setup |
| Maintenance | Periodic check of screws and parts |
| Cleaning | Wipe with dry cloth |
| Storage | Store in dry, cool place |
| Spare Parts Available | Replacement pins and rubber caps |
| Warranty | Standard manufacturer warranty |
Frequently Asked Questions - WB 09 DB Technologies
How do I assemble the WB 09 speaker stand?
To assemble the WB 09, extend the three base legs fully and secure them. Then insert the upper pole into the lower section and adjust to the desired height. Finally, tighten the clamp and insert the locking pin for safety. This takes less than a minute.
How do I adjust the height of the stand?
Loosen the knob or push the pin, slide the inner tube up or down to the desired position, then re-tighten the knob or re-insert the pin. The height range is 0.95 m to 1.80 m, allowing flexibility for different speaker placements.
What speakers are compatible with the WB 09?
The WB 09 fits most speakers with a 35 mm pole socket, which is the industry standard for PA speakers. It can support up to 25 kg, making it suitable for mid-size speakers and small line arrays.
What is the maximum load capacity of this stand?
The WB 09 can safely hold speakers weighing up to 25 kg. Always check your speaker's weight to ensure it does not exceed this limit, as overloading can cause instability and accidents.
Is the WB 09 stable on uneven surfaces?
The stand is designed with a cross-shaped base and rubber feet for good stability on most surfaces. However, on uneven ground, we recommend adjusting the legs to a level position and using a floor mat or platform for added safety.
How should I clean and maintain the stand?
Clean the stand with a dry or slightly damp cloth to remove dust and dirt. Avoid aggressive chemicals that could damage the powder coating. Periodically check all screws, pins, and rubber feet for wear and tighten them as needed.
Can I use this stand for subwoofers or heavy speakers?
The WB 09 is designed for mid-size speakers up to 25 kg. It is not recommended for subwoofers or very large speakers, as their weight may exceed the stand's capacity. For such applications, use a heavy-duty tripod stand.
Are spare parts available for the WB 09?
Yes, spare parts such as locking pins, rubber caps, and knobs can be ordered from DB Technologies or authorized dealers. These parts are replaceable to extend the life of the stand.
Can the stand be used outdoors?
The stand can be used outdoors, but it is made of steel with a powder-coated finish, so it may be susceptible to rust over time. Always wipe it dry after exposure to rain and store it in a dry place to prolong its lifespan.
How do I store the WB 09 when not in use?
To store, fold the base legs, retract the pole to its shortest position, and secure the clamp. Keep the stand in a dry, clean area, preferably in its original bag or packaging, to protect it from dust and damage.
User questions about WB 09 DB Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker Stand in PDF format for free! Find your manual WB 09 - DB Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WB 09 by DB Technologies.