APW-895NE - Sewing machine JUKI - Free user manual and instructions
Find the device manual for free APW-895NE JUKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Industrial sewing machine (pattern tacking) |
| Brand | JUKI |
| Model | APW-895NE |
| Dimensions (approx.) | 650 x 350 x 450 mm |
| Weight (approx.) | 45 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Power consumption | 250 W (typical) |
| Maximum sewing speed | 2,000 rpm (stitches per minute) |
| Stitch length | 1 - 5 mm adjustable |
| Automatic thread trimming | Yes |
| Automatic presser foot lift | Yes |
| Needle system | DP x 5 (standard industrial needle) |
| Lubrication system | Automatic oil feed |
| Maintenance and cleaning | Regularly clean dust and lint; oil according to manual |
| Safety features | Safety switch, finger guard, emergency stop |
| Spare parts and reparability | Genuine JUKI parts available; service manual included |
| Manual language | English (EN), also available in Chinese (ZH) |
| General information | High-speed, durable machine for medium to heavy fabrics |
Frequently Asked Questions - APW-895NE JUKI
How do I thread the JUKI APW-895NE sewing machine?
Follow the numbered threading path shown on the machine. Ensure the thread passes through all tension discs and take-up lever. For best results, raise the presser foot during threading.
What type of needle should I use with the APW-895NE?
Use DP x 5 industrial needles. The needle size depends on your fabric – for medium fabrics, use size 90/14; for heavy fabrics, use size 100/16 or 110/18.
How do I adjust the stitch length?
Turn the stitch length dial located on the machine. The dial provides adjustments from 1 to 5 mm. Always test on a scrap piece of fabric before starting.
Why is my thread breaking?
Check the thread tension: if too tight, reduce the tension on both upper and bobbin threads. Also ensure the needle is not damaged and is correctly inserted. Clean the thread path of any lint.
How do I wind the bobbin?
Place the bobbin on the winder spindle, push it to engage, and thread it as shown in the manual. Disengage the winding mechanism before sewing to avoid issues.
What maintenance does the APW-895NE require?
Regularly remove lint from the bobbin case and feed dogs. Oil the machine as indicated in the manual – typically every 8 hours of use or before heavy operation.
How do I engage the automatic thread trimmer?
The thread trimmer is activated by a button or pedal function. Refer to the user manual to see how to enable it. It automatically cuts top and bottom threads after sewing.
Why does the machine skip stitches?
Check the needle for bending or dullness and replace if needed. Ensure the needle is inserted fully into the holder and is not too fine for the thread/fabric combination.
What is the maximum sewing speed?
The maximum speed is 2,000 rpm. For optimal stitching quality, especially on curves, reduce the speed using the speed controller.
How do I clean the machine after heavy use?
Turn off and unplug the machine. Remove the needle and presser foot, then brush away lint from the feed dogs, bobbin area, and all moving parts. Wipe with a clean, dry cloth.
User questions about APW-895NE JUKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual APW-895NE - JUKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APW-895NE by JUKI.
USER MANUAL APW-895NE JUKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUKI
Model : APW-895NE
Category : Sewing machine