SCD 905X - Range hood SCHNEIDER - Free user manual and instructions
Find the device manual for free SCD 905X SCHNEIDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Schneider |
| Model | SCD 905X |
| Width | 90 cm (900 mm) |
| Height | Adjustable chimney, max 110 cm |
| Depth | 50 cm (500 mm) |
| Weight | Approximately 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Nominal Power | 200 W |
| Max Airflow | 680 m³/h |
| Number of Speeds | 3 speeds + intensive |
| Control Type | Electronic push buttons |
| Lighting | 2 x 2 W LED spots |
| Grease Filter | Aluminium, dishwasher safe |
| Ducting Options | Ducted (air extraction) |
| Recirculation | Possible with charcoal filter (optional) |
| Energy Class | B |
| Noise Level | Up to 65 dB(A) (max speed) |
| Installation | Wall mounted above cooktop |
| Warranty | 2 years manufacturer warranty |
Frequently Asked Questions - SCD 905X SCHNEIDER
How do I clean the grease filter?
Remove the grease filter by unlocking the release handle. Wash it in warm water with a mild detergent or in the dishwasher at 65°C. Always dry it thoroughly before reinstalling. Clean the filter every 2 months or more often if cooking frequently.
Can I use the range hood in recirculation mode?
Yes, the SCD 905X can be used with an optional charcoal carbon filter when outdoor ducting is not possible. The filtered air will be returned into the kitchen. Ensure the appropriate charcoal filter is installed.
How do I replace the charcoal filter?
Install the charcoal filter behind the grease filter after removing the grease filter. Push it into place and rotate. Replace the charcoal filter every 3-6 months depending on usage. Always replace after 100 cooking hours.
What is the correct installation height above the hob?
The minimum height between the hob and the bottom of the hood is 65 cm for electric hobs and 75 cm for gas or induction hobs. Follow local regulations.
Why does my hood make noise?
Noise can result from loose installation, a blocked duct, or a dirty blower wheel. Check that the hood is properly mounted, clean the filters, and ensure the duct is not blocked. If noise persists, contact technical support.
How do I change the LED light?
The LED lights are integrated. To replace them, disconnect power and remove the light cover. Then pull the LED module gently. Use a compatible LED spot rated 2 W. Reinstall the cover.
What does the intensive speed function do?
The intensive speed operates at maximum airflow for a short period (about 5 minutes) to remove strong kitchen odors or smoke. After the cycle, the hood returns to the previous speed.
How often should the grease filter be cleaned?
The grease filter should be cleaned regularly, ideally every 2 months. In heavy usage, clean monthly. A saturated filter reduces airflow and increases noise.
Why is there a warning about duct obstruction?
A blocked or kinked duct reduces extraction efficiency. Regularly inspect the duct for obstructions, and keep the duct length as short as possible with smooth bends to maintain optimal airflow.
How to reset the control panel after a power outage?
In most cases the control panel resets automatically when power is restored. If the panel is unresponsive, turn off the cooktop and the main switch, wait 5 minutes, then switch on again. If the issue persists, the electronic board may need service.
User questions about SCD 905X SCHNEIDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual SCD 905X - SCHNEIDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCD 905X by SCHNEIDER.
USER MANUAL SCD 905X SCHNEIDER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHNEIDER
Model : SCD 905X
Category : Range hood