REDCOOREWN2 - Wi-Fi repeater CoolBox - Free user manual and instructions
Find the device manual for free REDCOOREWN2 CoolBox in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | CoolBox |
| Model | REDCOOREWN2 |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | Dual Band (2.4 GHz + 5 GHz) |
| Maximum Wireless Speed | Up to 750 Mbps |
| Interfaces | 1x Fast Ethernet Port (10/100 Mbps) |
| Antenna | 2 External Antennas |
| Power Supply | 100-240V AC Adapter |
| Dimensions | 112 x 70 x 45 mm |
| Weight | 180 g |
| LED Indicators | Power, Network, Signal Strength |
| Buttons | WPS, Reset |
| Security Features | WPA/WPA2-PSK Encryption |
| Setup Method | WPS Pairing or Web Interface |
| Operating Range | Up to 300 m in open areas |
| Compatibility | Works with all standard Wi-Fi routers |
| Maintenance & Cleaning | Wipe with dry cloth; keep vents unobstructed |
| Safety | Keep away from water; do not cover during use |
| Spare Parts & Repairability | Replacement adapters and antennas available via CoolBox support |
| General Information | Plug-and-play extender for home or office networks |
Frequently Asked Questions - REDCOOREWN2 CoolBox
How do I set up my CoolBox REDCOOREWN2 Wi-Fi repeater?
Connect the repeater to a power outlet, press the WPS button on your router, then press the WPS button on the repeater within two minutes. The indicator will turn solid when connected. Alternatively, use the web interface at 192.168.0.254.
Why is my repeater not connecting to my router?
Ensure the repeater is within range of the router signal. Restart both devices and try again. Also verify that the router's firmware supports WPS pairing. If not, configure manually using the web-based setup page.
How can I reset the device to factory settings?
Press and hold the Reset button for about 8 seconds until the power LED blinks. The device will reboot with the default settings, allowing you to reconfigure it.
What is the maximum Wi-Fi speed supported?
The maximum wireless speed is 750 Mbps combined across both bands (300 Mbps on 2.4 GHz and 433 Mbps on 5 GHz). Actual speeds may vary based on environment and device capabilities.
Can I connect this repeater to a 5 GHz network?
Yes, the REDCOOREWN2 is a dual band repeater. You can extend either the 2.4 GHz or 5 GHz band using the corresponding settings in the web interface.
How do I change the Wi-Fi password on the repeater?
Log into the web interface with your browser, go to Wireless Settings, and modify the SSID and passphrase. Save the changes; the repeater will reboot to apply the new network name and password.
What does the WPS button do?
The WPS (Wi-Fi Protected Setup) button creates a quick encrypted connection between the repeater and your router, avoiding the need to enter passwords manually.
Can I use the Ethernet port to connect a wired device?
Yes, the built-in Fast Ethernet port allows you to connect a smart TV, game console, or computer via a wired network cable for a more stable connection.
How do I update the firmware?
Visit CoolBox support website, download the latest firmware file for REDCOOREWN2, and upload it via the web interface under "System Tools" > "Firmware Upgrade". Do not disconnect during the update.
What should I do if the internet speed is slow after installing the repeater?
Place the repeater halfway between your router and the dead zone. Ensure it receives a strong signal. Also avoid interference by changing the wireless channel in the router settings and selecting a less congested band.
User questions about REDCOOREWN2 CoolBox
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual REDCOOREWN2 - CoolBox and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REDCOOREWN2 by CoolBox.