REDCOOREWN - Wi-Fi repeater CoolBox - Free user manual and instructions
Find the device manual for free REDCOOREWN CoolBox in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | CoolBox |
| Model | REDCOOREWN |
| Dimensions (approx) | 10 x 7 x 3 cm |
| Weight (approx) | 200 g |
| Power Supply | 5V / 1A via Micro USB |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Speed | 300 Mbps |
| Coverage Area | Up to 100 m² |
| Modes | Repeater / Access Point |
| WPS Button | Yes |
| Ethernet Port | 1 x RJ45 10/100 |
| Security | WPA / WPA2 |
| LED Indicators | Power, WLAN, WPS |
| Reset Button | Yes (hold 10s) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Maintenance | Clean with soft dry cloth |
| Safety | Keep away from water and heat sources |
| Spare Parts | Not available separately |
| Repairability | Not user-serviceable |
Frequently Asked Questions - REDCOOREWN CoolBox
How do I set up the CoolBox REDCOOREWN Wi-Fi repeater?
Plug the repeater into a power outlet, press the WPS button on your router, then press the WPS button on the repeater within 2 minutes. The LED will turn solid when connected.
Is this repeater compatible with my router?
Yes, it works with any standard 802.11 b/g/n router at 2.4 GHz. Check that your router uses the same frequency band.
What do the LED lights mean?
Solid green indicates a good connection, slow blinking means pairing mode, fast blinking indicates an error or weak signal. See the manual for details.
How do I reset the device to factory settings?
Press and hold the Reset button for about 10 seconds using a paperclip until the LEDs flash. The repeater will restart with default settings.
What is the maximum range of this repeater?
Indoor range is approximately 100 m² (30-50 meters in open space). Actual range depends on walls and interference.
Why is my internet speed slower when using the repeater?
Wi-Fi repeaters typically half the bandwidth due to retransmission. Place the repeater halfway between the router and the dead zone for best performance.
Can I use this repeater as a standalone access point?
Yes, switch to AP mode via the web interface. Connect an Ethernet cable from the router to the repeater's LAN port.
How secure is this Wi-Fi repeater?
It supports WPA/WPA2 encryption. Ensure you set a strong password during initial setup via the web page.
Where should I place the repeater for optimal coverage?
Place it roughly halfway between your router and the area with weak signal, within range of the router's signal (about 2-3 bars). Avoid corners and metal objects.
Can I use multiple repeaters in the same network?
Yes, but each repeater adds latency and halves bandwidth. For best results, use only one or configure them in a daisy chain with different SSIDs.
User questions about REDCOOREWN CoolBox
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual REDCOOREWN - CoolBox and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REDCOOREWN by CoolBox.