TX1000BP - Microphone CAD Audio - Free user manual and instructions
Find the device manual for free TX1000BP CAD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dynamic Vocal Microphone |
| Brand | CAD Audio |
| Model | TX1000BP |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 15 kHz |
| Sensitivity | -54 dBV/Pa |
| Output Impedance | 300 Ω |
| Connector | 3-Pin XLR |
| Transducer Principle | Dynamic |
| Body Material | Die-cast Zinc Alloy |
| Dimensions | 6.5 x 2.1 x 2.1 in (165 x 54 x 54 mm) |
| Weight | 10.6 oz (300 g) |
| Power Requirement | None (Dynamic) |
| Main Features | Neodymium magnet, internal shock mount, anti-rolling design |
| Included Accessories | Microphone clip, protective pouch |
| Cleaning | Wipe with dry soft cloth |
| Safety | Keep away from moisture and extreme temperatures |
| Spare Parts | Replacement grille, replacement cartridge |
| Warranty | 1-Year Limited Warranty |
| General Information | Designed for stage and studio use |
Frequently Asked Questions - TX1000BP CAD Audio
What type of microphone is the CAD Audio TX1000BP?
It is a dynamic microphone with a cardioid polar pattern, ideal for vocals and live performance.
Does the TX1000BP require phantom power?
No, dynamic microphones like the TX1000BP generate their own signal with the moving coil transducer, so no phantom power is required.
What is the cardioid polar pattern and how should I position it?
The cardioid pattern picks up sound primarily from the front and rejects from the rear. Position the microphone with the front toward the sound source, about 2-4 inches away for best results.
What XLR cable do I need?
Use a standard balanced XLR cable with 3-pin male to female connections. A quality cable from brands like Mogami or Canare ensures low noise.
How do I clean the microphone grille?
Unscrew the grille and wash it with warm soapy water. Dry thoroughly before reattaching. The cartridge can be gently dusted with a soft brush.
Can I use this microphone for recording vocals at home?
Yes, the TX1000BP works well for home recording when connected through an audio interface with an XLR input. Its cardioid pattern minimizes background noise.
What stand and clip are compatible?
The included microphone clip fits standard 5/8-inch threaded stands. You can use a boom stand or straight stand with a shock mount for optimal isolation.
How do I troubleshoot low output level?
Check that the XLR cable is fully seated and your mixer/interface gain is set to adequate level. Because it's a dynamic mic, it may require more gain than a condenser.
Is the microphone shielded against interference?
Yes, the mic features a internal shield and a transformer-balanced output to reject EMI/RFI noise.
How do I store the microphone properly?
Keep it in a dry, cool place with the included pouch. Loosen the clip if left on the stand and store with the capsule facing up to prevent dust collection.
User questions about TX1000BP CAD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual TX1000BP - CAD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX1000BP by CAD Audio.
USER MANUAL TX1000BP CAD Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CAD Audio
Model : TX1000BP
Category : Microphone