BE501310WM - Built-in oven AEG - Free user manual and instructions
Find the device manual for free BE501310WM AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in oven |
| Brand | AEG |
| Model | BE501310WM |
| Installation type | Built into a kitchen cabinet |
| Energy source | Electric |
| Usable capacity | 71 litres |
| Product dimensions (H x W x D) | 59.4 x 59.4 x 56.7 cm |
| Net weight | 35 kg |
| Connection power | 2,950 W |
| Supply voltage | 220-240 V, 50 Hz |
| Energy class | A+ |
| Number of cooking modes | 10 modes |
| Temperature range | 50 °C to 275 °C |
| Display | Digital clock with kitchen timer |
| Control type | Rotary dials and touch screen |
| Cooking modes | Hot air, fan-assisted, grill, fan grill, bottom heat, defrost |
| Cleaning function | Pyrolysis and catalytic liners |
| Safety | Child lock, cool door, automatic shut-off |
| Door | Double glazing and removable hinges |
| Included accessories | Wire rack, dripping pan, baking tray |
| Repairability index | 5.8 out of 10 |
| Warranty | 2 years |
Frequently Asked Questions - BE501310WM AEG
How do I install my AEG BE501310WM built-in oven?
The oven must be built into a heat-resistant cabinet in accordance with the distances indicated in the instructions. The electrical connection must be carried out by a qualified technician on a dedicated 220-240 V line with earthing.
What to do before first use?
Remove all packaging, films and stickers, then clean the interior with soapy water. Heat the empty oven in convection mode for 30 minutes at 200 °C to eliminate manufacturing odours.
The oven no longer heats up, what should I check?
Check the electrical supply, the circuit breaker and the timer programming. If the timer is activated, it may block the heating. If the problem persists, contact customer service.
How to enable the child lock?
Press the lock button for about 3 seconds until the lock symbol appears. To disable, repeat the same operation.
How to clean my oven using the pyrolysis mode?
Remove all grids and accessories, close the door and select the pyrolysis mode. The oven heats to a very high temperature to reduce grime to ashes. After cooling, wipe the interior with a damp cloth.
What is the capacity of this oven and what size of dishes can it accommodate?
The usable capacity is 71 litres. This standard built-in oven accepts trays and dishes suitable for a width of 60 cm, including the supplied dripping pans.
Can I replace the oven light bulb myself?
Yes. First disconnect the electrical supply, remove the glass cover, then screw in a compatible high temperature bulb (type E14, 300 °C) available as a spare part.
How to remove the oven door for cleaning?
Open the door, unlock the hinges using the levers, close the door halfway then pull it upwards to remove it. After cleaning, replace the door and lock it again.
How to use the convection (hot air) function?
Select the convection mode and preheat the oven for about 10 minutes. This mode distributes heat evenly, allowing you to cook several dishes at the same time without transferring odours.
How to maintain the catalytic walls?
The catalytic walls absorb grease. Wipe them with a damp sponge without abrasive products. To regenerate them, run an empty cycle at 250 °C for 1 hour.
User questions about BE501310WM AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Built-in oven in PDF format for free! Find your manual BE501310WM - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BE501310WM by AEG.
USER MANUAL BE501310WM AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : BE501310WM
Category : Built-in oven