HX 120 - Heating ASTRALPOOL - Free user manual and instructions
Find the device manual for free HX 120 ASTRALPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air source pool heat pump |
| Brand | ASTRALPOOL |
| Model | HX 120 |
| Heating Capacity | 120,000 BTU/h (35 kW) |
| Power Supply | 230 V, single phase, 50 Hz |
| Rated Input Power | 3.5 kW (approximate) |
| Water Connection | 50 mm (2 inch) union |
| Water Flow Rate | 12 - 18 m³/h |
| Operating Air Temperature | -5°C to +43°C |
| Refrigerant Type | R410A |
| Noise Level | 58 - 62 dB(A) at 1 m |
| Dimensions (L x W x H) | 900 x 700 x 480 mm |
| Weight | 85 kg (dry) |
| Control System | Electronic controller with LED display |
| Main Functions | Heating, defrost, timer, temperature setpoint |
| Maintenance | Clean air intake grid, inspect heat exchanger, check electrodes |
| Safety Features | High-pressure switch, low-pressure switch, overload protection, frost protection |
| Spare Parts / Repairability | Replaceable fan motor, compressor, electronic board, sensors |
| Recommended Pool Volume | Up to 120 m³ |
Frequently Asked Questions - HX 120 ASTRALPOOL
What is the maximum pool size for the HX 120?
The HX 120 is designed for pools up to 120 m³. It provides ample heating capacity to raise water temperature efficiently.
What type of electrical connection is required?
A 230 V single-phase supply with a dedicated 16 A circuit breaker is recommended. Always follow local electrical codes and ensure grounding.
How often should I clean the heat pump?
Clean the air intake grid and evaporator coils every 2-4 weeks, or more often if the environment is dusty. Also check the drain holes are not blocked.
Can the HX 120 be used with salt water pools?
Yes, the heat exchanger is made of titanium, which is corrosion-resistant, making it suitable for saline and chlorinated pools.
What is the operating range for the heat pump?
The heat pump can operate when the outdoor air temperature is between -5°C and +43°C. For optimal performance, keep ambient temperatures above 10°C for heating.
How do I winterize the unit?
If the unit will not be used in winter, drain the water circuit and cover the heat pump. Some models have a frost protection function; enable it to prevent damage.
What do error codes like E1 mean?
Error codes vary by model. E1 usually indicates a high-pressure fault. Check water flow, refrigerant pressure, and ensure the condenser is clean. Refer to the manual for a list of codes.
How do I set the target temperature?
Use the control panel to set the desired water temperature. The heat pump will automatically start or stop heating to maintain the setpoint.
What maintenance does the titanium heat exchanger require?
Titanium heat exchangers are nearly maintenance-free. Periodically inspect the water circuit for leaks and make sure the flow switch is operating correctly.
Is the unit compatible with a timer?
Yes, the built-in timer allows you to schedule heating cycles during off-peak electricity times, saving energy.
User questions about HX 120 ASTRALPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HX 120 - ASTRALPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HX 120 by ASTRALPOOL.
USER MANUAL HX 120 ASTRALPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASTRALPOOL
Model : HX 120
Category : Heating