T2005 - Switch INTERMATIC - Free user manual and instructions
Find the device manual for free T2005 INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Switch |
| Brand | Intermatic |
| Model | T2005 |
| Category | Switch |
| Function | Manual on/off switching |
| Mounting | Wall-mount with screws |
| Voltage Rating | 120 V AC |
| Current Rating | 15 A |
| Maximum Load | 1800 W (resistive) |
| Number of Poles | 1 |
| Operation Type | Toggle switch |
| Material | Flame-retardant thermoplastic |
| Color | White |
| Dimensions | 3.5 x 2.5 x 1.5 in |
| Weight | 0.6 lb |
| Terminals | Screw type |
| Operating Temperature | -20 °C to 60 °C |
| Certification | UL Listed |
| Maintenance | Periodic inspection of connections |
| Cleaning | Wipe with dry cloth |
| Safety | Disconnect power before servicing |
| Repairability | No user-serviceable parts |
Frequently Asked Questions - T2005 INTERMATIC
How do I install the Intermatic T2005 switch?
Turn off power at the circuit breaker, use a voltage tester, then connect the wires to the screw terminals matching the wiring diagram. Ensure a secure connection before mounting back in the wall box.
What is the maximum load for the T2005?
It is rated for 15 A at 120 V AC, so the maximum load is 1,800 W for resistive loads. For motor loads, derate to 80% (approximately 1,440 W).
Can I use this switch with LED bulbs?
Yes, the switch is compatible with standard LED bulbs as long as the total wattage stays within the rated load and the bulbs do not have electronic drivers that require a neutral, unless the switch provides one.
Does the T2005 support three-way wiring?
No, the T2005 is a single-pole switch and does not have dedicated traveler terminals. For three-way circuits, look for a three-way rated model.
Will this switch fit a standard wall plate?
Yes, it is designed for standard single-gang junction boxes and accepts standard wall plates.
How should I clean the switch?
Wipe the surface with a dry or slightly damp cloth. Do not use spraying liquids or abrasive cleaners, as they may damage the finish or enter the mechanism.
Is the Intermatic T2005 UL listed?
Yes, it carries UL listing for safety and performance in residential and commercial applications.
The switch gets warm after use, is that normal?
A mild warmth is normal when controlling higher loads. If it become hot to touch, turn off power and verify that the load does not exceed the rating and that the wiring is tight.
Does the switch have a built-in indicator light?
The standard T2005 does not include an LED pilot light. You can identify the switch state by the toggle position.
Can I use the T2005 outdoors?
If installed in a weatherproof enclosure with a gasket, it can be used outdoors. Otherwise, it is intended for indoor use only.
User questions about T2005 INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual T2005 - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T2005 by INTERMATIC.
USER MANUAL T2005 INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : T2005
Category : Switch