T1905E - Switch INTERMATIC - Free user manual and instructions
Find the device manual for free T1905E INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Switch |
| Brand | Intermatic |
| Model | T1905E |
| Category | Switch |
| Rated Voltage | 120/277 V AC |
| Rated Current | 15 A |
| Function | On/Off control |
| Poles | Single pole |
| Wire Configuration | Single throw |
| Terminals | Screw terminals |
| Mounting | Standard wall box |
| Enclosure Material | Flame retardant thermoplastic |
| Operating Temperature | 32°F to 140°F (0°C to 60°C) |
| Dimensions (H x W x D) | 3.5 x 2 x 1.2 in (89 x 51 x 30 mm) |
| Weight | 0.1 lb (45 g) |
| Certifications | UL Listed, CSA certified |
| Maintenance | Wipe with dry cloth; no solvents |
| Repairability | Replace unit if defective |
| Compatibility | Incandescent and LED loads up to rated current |
| Warranty | One year limited warranty |
Frequently Asked Questions - T1905E INTERMATIC
What is the maximum load capacity of this switch?
This switch is rated for 120/277 V AC and 15 amperes. At 120 volts that can control up to 1800 watts of lighting.
Can I use this switch with LED bulbs?
Yes, the T1905E is compatible with LED loads as long as the total wattage stays below the maximum rating. For LED drivers, ensure inrush current does not exceed the switch rating.
How do I install the T1905E switch?
First, turn off power at the circuit breaker. Remove the old switch, connect the hot and load wires to the screw terminals, and push the switch into the wall box. Secure with mounting screws and restore power.
Is this switch suitable for three-way circuits?
No, this is a single-pole switch. For a three-way circuit, you need a three-way switch model. This model only controls a fixture from one location.
What wire size should I use?
Use 14 AWG or 12 AWG copper wire. The terminals are rated for up to 12 AWG solid copper wire.
Can the switch be used outdoors?
It is not weatherproof by itself. For outdoor installation, use it inside a weatherproof box with an in-use cover to protect it from moisture.
Does the switch have an indicator light?
No. The T1905E does not include an LED indicator or a night light. It is a simple mechanical switch without illumination.
What types of loads can this switch control?
It can control incandescent, halogen, LED, CFL and other resistive or inductive loads within the current and voltage limits.
Is there a warranty for this product?
Intermatic offers a one-year limited warranty against defects in material and workmanship. Keep your purchase receipt for service.
How do I clean the switch?
Wipe the switch with a soft dry cloth. Do not use any liquid cleaners or solvents, as they may damage the plastic parts.
User questions about T1905E INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual T1905E - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T1905E by INTERMATIC.
USER MANUAL T1905E INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : T1905E
Category : Switch