PRO-TWN5 - Loudspeaker DS18 - Free user manual and instructions
Find the device manual for free PRO-TWN5 DS18 in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pro Audio Tweeter |
| Brand | DS18 |
| Model | PRO-TWN5 |
| Category | Loudspeaker |
| Driver Type | Compression Horn Tweeter |
| Diaphragm Material | Aluminum |
| Magnet Material | Neodymium |
| Voice Coil Diameter | 1.75 inch |
| Nominal Impedance | 4 ohms |
| Sensitivity | 108 dB @ 1W/1m |
| Frequency Response | 1,500 Hz - 20,000 Hz |
| Power Handling (RMS) | 200 W |
| Power Handling (Peak) | 400 W |
| Recommended Amplifier Power | 50-200 W per channel |
| Mounting Type | Surface Mount |
| Cutout Diameter | 4.6 inch |
| Overall Diameter | 5.3 inch |
| Depth | 2.8 inch |
| Weight | 1.5 lb |
| Terminal Type | Push-Type Connectors |
| Color | Black |
| Included Accessories | Mounting Brackets, Wiring Kit |
| Water Resistance | IP65 Rated |
| Maintenance | Wipe with a dry cloth; keep away from solvents |
| Safety | Confirm proper crossovers before installation |
Frequently Asked Questions - PRO-TWN5 DS18
What is the DS18 PRO-TWN5?
The DS18 PRO-TWN5 is a high-performance pro audio tweeter designed for both car and home audio systems. It delivers clear and crisp highs with a compression horn design for increased efficiency.
What is the power handling of the PRO-TWN5?
It handles 200 watts RMS and 400 watts peak, making it suitable for powerful amplifiers. We recommend an amp that delivers 50–200 watts RMS per channel to avoid distortion.
What is the impedance of this tweeter?
The nominal impedance is 4 ohms. You can connect two tweeters in parallel to get a 2-ohm load if your amplifier supports it, or in series for 8 ohms.
What is the frequency response?
The frequency response is 1,500 Hz to 20,000 Hz. It is best used with a crossover set around 1,500–2,500 Hz to protect the tweeter from bass frequencies.
Does the package include mounting hardware?
Yes, the package includes mounting brackets, wiring connectors, and necessary screws for a straightforward surface mount installation.
Can I use this tweeter for marine applications?
Yes, the PRO-TWN5 is IP65 water-resistant, making it suitable for boats, ATVs, and other outdoor vehicles, as long as the mounting location is protected from direct water jets.
How do I connect the tweeter to my amplifier?
Use the push-type terminals to connect the positive and negative speaker wires. Ensure the polarity matches other speakers. For bi-amping or crossover use, connect the tweeter to the high-pass output of an active crossover.
What is the recommended crossover point?
For best results, set the high-pass crossover at 1,500 Hz or higher. This prevents low-frequency signals from damaging the diaphragm. A slope of at least 12 dB/octave is advised.
How durable is the diaphragm?
The diaphragm is made of aluminum, which is lightweight yet rigid, reducing distortion and handling high volumes. The neodymium magnet ensures a strong motor while keeping the weight low.
What is the sensitivity rating and why does it matter?
The sensitivity is 108 dB @ 1W/1m, which means it produces high output with minimal power. This makes it extremely efficient, ideal for systems with limited amplifier power.
User questions about PRO-TWN5 DS18
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PRO-TWN5 - DS18 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO-TWN5 by DS18.
USER MANUAL PRO-TWN5 DS18
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DS18
Model : PRO-TWN5
Category : Loudspeaker