PRO-DPL1PH - Loudspeaker DS18 - Free user manual and instructions
Find the device manual for free PRO-DPL1PH DS18 in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 1-inch Compression Driver (Tweeter) |
| Brand | DS18 |
| Model | PRO-DPL1PH |
| Category | Loudspeaker Component |
| Nominal Impedance | 8 Ohms |
| RMS Power Handling | 150 Watts |
| Peak Power Handling | 300 Watts |
| Frequency Response | 1,200 Hz - 20,000 Hz |
| Sensitivity | 105 dB @ 1W/1m |
| Voice Coil Size | 1.75 inches |
| Diaphragm Material | Titanium |
| Magnet Type | Ferrite |
| Dimensions (Diameter x Depth) | 4.13 x 2.36 inches (105 x 60 mm) |
| Weight | 2.2 lbs (1 kg) |
| Recommended Crossover Frequency | 2,500 Hz (12 dB/octave) |
| Mounting Type | Bolt-on |
| Construction Material | Die-cast aluminum housing |
| Power Source | Passive (requires external amplifier) |
| Cleaning and Maintenance | Wipe with dry cloth; avoid moisture ingress |
| Safety Information | Use appropriate crossover to prevent damage; professional installation recommended |
| Spare Parts and Reparability | Replaceable diaphragm and voice coil assemblies available |
| General Information | Designed for professional audio systems, PA, and marine audio applications |
Frequently Asked Questions - PRO-DPL1PH DS18
What is the DS18 PRO-DPL1PH?
The DS18 PRO-DPL1PH is a 1-inch compression driver designed for use in professional audio systems, PA speakers, and marine audio. It delivers clear high-frequency reproduction and reliable performance.
What is the recommended crossover frequency?
A crossover frequency of 2,500 Hz with a slope of at least 12 dB/octave is recommended to protect the driver from low-frequency damage and ensure optimal sound quality.
How do I connect the PRO-DPL1PH to my amplifier?
Connect the driver to your amplifier through a suitable crossover network. Ensure the amplifier output is matched to the 8-ohm impedance and that the power does not exceed the 150W RMS rating.
What type of horn does this driver require?
The PRO-DPL1PH is a bolt-on compression driver and requires a separate horn with a standard 1-inch throat. Choose a horn that fits your mounting and dispersion needs.
Is the PRO-DPL1PH suitable for marine or outdoor use?
Yes, the driver features a die-cast aluminum housing and a protective coating that helps resist moisture and corrosion. However, avoid direct exposure to water and ensure proper sealing in outdoor installations.
How should I maintain and clean this driver?
Gently wipe the exterior with a dry, soft cloth to remove dust. Do not use any liquids or sprays, as they may damage the diaphragm or voice coil.
Can I replace the diaphragm if it gets damaged?
Yes, the diaphragm and voice coil assembly are replaceable. Contact DS18 or an authorized dealer for compatible replacement parts and installation guidance.
What are the dimensions and mounting specs?
The driver has a diameter of 4.13 inches (105 mm) and a depth of 2.36 inches (60 mm). It uses a bolt-on mounting pattern for secure installation.
What is the power handling of this driver?
The PRO-DPL1PH can handle 150 watts RMS and 300 watts peak. Always use a crossover and avoid clipping to prevent damage.
Does this driver come with a horn or is it sold separately?
The PRO-DPL1PH is sold as a driver only. Horns are not included and must be purchased separately to complete your speaker system.
User questions about PRO-DPL1PH DS18
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PRO-DPL1PH - DS18 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO-DPL1PH by DS18.
USER MANUAL PRO-DPL1PH DS18
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DS18
Model : PRO-DPL1PH
Category : Loudspeaker