QiCR-200 - Alarm Clock JENSEN - Free user manual and instructions
Find the device manual for free QiCR-200 JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm clock radio |
| Brand | JENSEN |
| Model | QiCR-200 |
| Display Type | Digital LED display with adjustable brightness |
| Radio Tuner | AM/FM with PLL tuning |
| Alarm Modes | Radio or buzzer with dual independent alarm |
| Snooze Duration | 9 minutes |
| Sleep Timer | Up to 90 minutes |
| Power Source | AC adapter 100-240V, 50/60Hz; output 5V DC 1A |
| Backup Battery | 9V DC (not included) for clock memory |
| Built-in Speaker | 3-inch, 2W output |
| Audio Input | 3.5mm AUX port |
| Headphone Jack | 3.5mm |
| Dimensions (W x H x D) | 6.5 x 3.2 x 2.8 in (16.5 x 8.1 x 7.1 cm) |
| Weight | 1.2 lbs (544 g) |
| Cabinet Finish | Black textured finish |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use abrasive cleaners |
| Safety Warnings | For indoor use; keep away from water and heat sources |
| Spare Parts & Repairability | Replacement parts via JENSEN support; no user-serviceable components |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - QiCR-200 JENSEN
How do I set the time on my Jensen QiCR-200?
Press and hold the Time button until the hour digits flash, then use + and - buttons to adjust the hour. Press Time again to set minutes and confirm.
How do I set the alarm to wake me up with the radio?
Press the Alarm button until the alarm time appears on the display. Use + and - to set the hour and minute. Choose Radio mode with the Source/Alarm Mode button. Make sure the radio volume is set high enough.
How do I replace the backup battery?
Locate the battery compartment on the bottom, open the cover, and insert a fresh 9V battery (not included) with the correct polarity. The battery protects the time and alarm settings during power outages.
Why is the display showing a flashing time?
A flashing display indicates that the AC power was interrupted and the backup battery is missing or discharged. Replace the 9V battery and reset the time and alarms.
Can I use headphones with this alarm clock?
Yes, connect wired headphones to the 3.5mm headphone jack on the side of the unit. Inserting headphones automatically silences the built-in speaker.
How do I turn off the alarm when it sounds?
Press the Snooze button to temporarily silence it for 9 minutes, or press the Alarm Reset/Power button to stop it until the next scheduled alarm.
Does the QiCR-200 have a sleep timer that turns off the radio?
Yes, press the Sleep button repeatedly to cycle through sleep time options (90, 60, 30, or 15 minutes). The radio will shut off automatically after the selected time.
What power adapter is compatible with this clock?
Use only the included AC adapter (input 100-240V, 50/60Hz; output 5V DC 1A). It is specifically designed for the QiCR-200, so do not replace it with a different model to avoid damage.
How do I clean my Jensen alarm clock?
Unplug the unit first. Wipe the surface with a soft, slightly damp cloth and then dry it. Do not use solvents, sprays, or abrasive cleaners as they may damage the finish.
What should I do if the radio reception is poor?
Extend and reposition the wire antenna to improve FM reception. For AM, the unit has a built-in ferrite antenna; rotate the entire clock to find the best position. Keep it away from electronic devices that cause interference.
User questions about QiCR-200 JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm Clock in PDF format for free! Find your manual QiCR-200 - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QiCR-200 by JENSEN.
USER MANUAL QiCR-200 JENSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JENSEN
Model : QiCR-200
Category : Alarm Clock