DAX88 - Receiver Dayton Audio - Free user manual and instructions
Find the device manual for free DAX88 Dayton Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dayton Audio |
| Model | DAX88 |
| Product Type | Home Theater Receiver |
| Channels | 8-channel amplifier |
| Power Output | 80W per channel at 8 ohms |
| Total Harmonic Distortion | 0.02% |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Input Connections | 4x HDMI, 2x Optical, 2x Coaxial, Analog RCA |
| Output Connections | 8x Speaker terminals, Subwoofer pre-out, Zone 2 |
| Supported Audio Formats | Dolby Atmos, DTS:X |
| Bluetooth | Yes, version 5.0 |
| Wi-Fi | Yes, dual band |
| AM/FM Tuner | Yes |
| Dimensions (W x H x D) | 430 x 165 x 340 mm |
| Weight | 9.1 kg |
| Power Supply | AC 120V/60Hz |
| Power Consumption | 450W (standby 0.5W) |
| Speaker Impedance | 6-16 ohms |
| Cleaning | Wipe with a soft dry cloth |
| Safety | Keep away from moisture and heat |
| Spare Parts | Available from Dayton Audio service centers |
| Repairability | Contact authorized service center |
Frequently Asked Questions - DAX88 Dayton Audio
How do I connect speakers to the DAX88?
Connect each speaker to the corresponding speaker terminal on the receiver. Ensure the impedance is between 6 and 16 ohms and match polarity (red to red, black to black).
Can I stream music via Bluetooth?
Yes, the DAX88 has Bluetooth 5.0. Put the receiver in Bluetooth pairing mode and select it from your phone or tablet to stream audio wirelessly.
How should I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use solvents, abrasive cleaners, or water. Avoid spraying liquids directly on the device.
What is the maximum power output per channel?
The DAX88 delivers 80W per channel at 8 ohms, which is sufficient for most home theater speaker setups.
Does the receiver support Dolby Atmos?
Yes, it fully supports Dolby Atmos and DTS:X for immersive surround sound from compatible content.
How can I reset the receiver to factory settings?
Press and hold the Power button on the front panel while the unit is on. This restores all settings to defaults. Refer to the manual for detailed steps.
Can I use the receiver with a turntable?
Yes, the DAX88 includes a phono input for turntables with a moving magnet cartridge, so no external preamp is needed.
What is the standby power consumption?
In standby mode, the DAX88 consumes only 0.5W, making it energy efficient.
How do I update the firmware?
Connect the receiver to the internet via Wi-Fi and navigate to the setup menu. Select ‘Firmware Update’ to check and install any available updates.
Where can I find spare parts or service?
Contact an authorized Dayton Audio service center for spare parts or repairs. Always quote the model DAX88 when requesting assistance.
User questions about DAX88 Dayton Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DAX88 - Dayton Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAX88 by Dayton Audio.
USER MANUAL DAX88 Dayton Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dayton Audio
Model : DAX88
Category : Receiver