VigorSwitch P2280x - Network switch Draytek - Free user manual and instructions
Find the device manual for free VigorSwitch P2280x Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Ports | 24 x RJ45 10/100/1000 Mbps + 4 x SFP |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 16K entries |
| Dimensions | 440 x 200 x 44 mm (19-inch rack mount) |
| Weight | 2.5 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | Max 24 W |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% non-condensing |
| Management Interfaces | Web, CLI, SNMP, Telnet, SSH |
| VLAN Support | 802.1Q VLAN, port-based VLAN |
| QoS Support | 802.1p, port-based priority |
| Security Features | 802.1X port authentication, ACL |
| Link Aggregation | LACP up to 8 groups per device |
| IGMP Snooping | Supports IGMP v1/v2/v3 snooping |
| Mounting | 19-inch rack mount brackets included |
| Cooling | Built-in smart fan |
| Maintenance | Keep vents unobstructed; clean with dry cloth |
| Safety | Use certified power cord; avoid liquid contact |
| Spare Parts / Repairability | Contact DrayTek authorized service; do not open |
| General Information | Designed for SMB networks, advanced L2 management |
Frequently Asked Questions - VigorSwitch P2280x Draytek
How do I access the web interface of the VigorSwitch P2280x?
Connect your computer to one of the RJ45 ports, set an IP address in the same subnet, then open a browser and enter the switch's default IP (usually 192.168.1.1).
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until all LEDs blink, then release. The switch will restore factory settings and reboot.
Does the VigorSwitch P2280x support PoE?
No, the P2280x is a non-PoE model. It provides standard Gigabit switching and SFP uplinks, but does not deliver power over Ethernet to connected devices.
How can I configure VLANs?
Go to the VLAN menu in the web interface. You can create 802.1Q VLANs, assign ports as tagged or untagged, and set the PVID for each port.
How do I update the firmware?
Download the latest firmware from the DrayTek website, then go to Maintenance > Firmware Upgrade in the web interface. Choose the file and click Upgrade. Ensure the process is not interrupted.
What is the default IP address of the switch?
The factory default IP is 192.168.1.1 with subnet mask 255.255.255.0. You can also use the console port to access the CLI.
How do I enable DHCP client on the switch?
In the Management section, set the IP configuration to DHCP. The switch will obtain an address from your network's DHCP server. You can find the assigned IP via the console or a DHCP reservation.
How do I troubleshoot link or port issues?
Check the link LED status on the port. Ensure the cable is firmly connected and works. You can also run port diagnostics in the web interface to test cable quality.
Does the VigorSwitch P2280x support stacking or daisy-chaining?
The switch supports link aggregation (LACP) and normal uplink via SFP, but not dedicated stacking. You can daisy-chain switches using standard Ethernet connections.
How do I perform a factory reset using the front panel button?
With the device powered on, press and hold the Reset button for 10 seconds until the system LED flashes rapidly. Release the button and wait for the switch to reboot with default settings.
User questions about VigorSwitch P2280x Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual VigorSwitch P2280x - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorSwitch P2280x by Draytek.
USER MANUAL VigorSwitch P2280x Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : VigorSwitch P2280x
Category : Network switch