VigorSwitch G2121 - Network switch Draytek - Free user manual and instructions
Find the device manual for free VigorSwitch G2121 Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Draytek |
| Model | VigorSwitch G2121 |
| Product Type | Managed Network Switch |
| Ports | 24 x 10/100/1000 Mbps Gigabit Ethernet, 4 x Gigabit SFP Combo |
| Dimensions (W x D x H) | 440 x 210 x 44 mm (1U Rackmount) |
| Weight | 3.0 kg |
| Power Supply | AC 100-240V, 50-60Hz, Internal |
| Power Consumption | 30W Max |
| Cooling | Intelligent fan with speed control |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q VLAN, up to 4K VLAN groups |
| QoS | 8 priority queues, port-based, 802.1p, DSCP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, RMON, Telnet, SSH |
| Security | 802.1X, ACL, Port Security, MAC Authentication, DHCP Snooping |
| Additional Features | IGMP Snooping, Link Aggregation (LACP), Port Mirroring, Cable Diagnostics, Loop Protection, Spanning Tree (STP/RSTP/MSTP) |
| LED Indicators | Power, System, per-port Link/Activity, Speed |
| Reset Button | Yes (factory reset) |
| Rackmount Kit | Included |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, LVD |
Frequently Asked Questions - VigorSwitch G2121 Draytek
What is the default IP address of the Draytek VigorSwitch G2121?
The default management IP address is 192.168.1.1. You can access the web interface via a browser.
How do I reset the switch to factory defaults?
Use a pointed object to press and hold the Reset button on the front panel for about 10 seconds until all LEDs flash. Release the button, and the switch will reboot with factory settings.
Does this switch support PoE?
No, the Draytek VigorSwitch G2121 is a non-PoE switch. It does not provide Power over Ethernet on its ports.
Can I use SFP modules in the combo ports?
Yes, the four combo ports can be used either as RJ45 Gigabit Ethernet or as SFP slots for fiber modules. The two media types share the same port number.
How to configure VLANs on this switch?
You can create VLANs through the web GUI under VLAN settings. Use 802.1Q tagging, assign ports to VLANs, and set the PVID accordingly. Advanced options include private VLAN and VLAN translation.
What is the maximum power consumption?
The switch has a maximum power consumption of 30W. It uses an internal power supply with auto-sensing voltage (100-240V AC).
How to update the firmware?
Download the latest firmware from Draytek's website. In the web interface, go to Maintenance > Firmware Upgrade, select the file, and upload. The switch will reboot after successful upgrade. Do not power off during the process.
Does this switch support link aggregation?
Yes, it supports LACP (IEEE 802.3ad) and static link aggregation. You can group up to 8 ports into a single logical link for increased bandwidth and redundancy.
What is the switching capacity?
The switching capacity is 56 Gbps, sufficient for wire-speed forwarding on all 24 Gigabit ports and 4 SFP ports.
How do I access the command-line interface?
You can access the CLI via Telnet or SSH (recommended). The default username is 'admin' and password is 'admin' (change on first login). Use a terminal emulator like PuTTY.
User questions about VigorSwitch G2121 Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual VigorSwitch G2121 - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorSwitch G2121 by Draytek.
USER MANUAL VigorSwitch G2121 Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : VigorSwitch G2121
Category : Network switch