Venezia ZVE-E42DS - Range hood Zephyr - Free user manual and instructions
Find the device manual for free Venezia ZVE-E42DS Zephyr in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted range hood |
| Brand | Zephyr |
| Model | Venezia ZVE-E42DS |
| Width | 106.7 cm (42 inches) |
| Height | Adjustable from 66 to 104 cm |
| Depth | 61 cm |
| Net weight | 32 kg |
| Finish type | Brushed stainless steel |
| Power supply | 220-240 V, 50 Hz |
| Suction power | 1000 m³/h (600 CFM) |
| Speed levels | 3 |
| Lighting type | Integrated LED (2 x 1 W) |
| Controls | Electronic button control panel |
| Filters | 2 stainless steel baffle filters, dishwasher-safe |
| Evacuation | Top or rear, Ø 150 mm |
| Timer function | Yes |
| Automatic shut-off function | Yes |
| Remote control | Optional |
| Noise level | 56 dB (max) |
| Maintenance | Regular cleaning of filters and stainless steel surface |
| Safety | CE certification, thermal safety switch |
| Spare parts | Available, repairability guaranteed by the manufacturer |
Frequently Asked Questions - Venezia ZVE-E42DS Zephyr
What is the recommended installation height for the Venezia ZVE-E42DS range hood?
The ideal height between the cooktop and the hood is about 65 to 75 cm. Consult the manual for exact measurements, as it may vary depending on the type of cooking.
How do I clean the baffle filters of the range hood?
Remove the filters by unclipping them. Wash them by hand or in the dishwasher with a short cycle. Dry them thoroughly before replacing them. Cleaning every 2 to 3 months is recommended.
How do I replace the LED bulbs?
The LED bulbs are integrated. To replace them, cut off the power, remove the lighting strip, and unclip the defective module. Use an original Zephyr spare part.
Why does the suction flow seem weak?
Check that the filters are not obstructed and that the exhaust duct is not bent or blocked. Also remember to activate the maximum speed for strong odors. Regular maintenance is essential.
Can I use the range hood in recirculation mode?
Yes, the range hood can be used in recirculation mode with a charcoal filter kit (optional). The exhaust duct is then blocked and the air is filtered before being released back into the room.
How do I activate the timer?
Press the Timer button then select the desired duration (5, 10, or 15 minutes). The hood will stop automatically at the end of the selected time.
How do I clean the stainless steel surface?
Use a soft cloth and a special stainless steel cleaner following the brushing direction. Avoid abrasive sponges that scratch the surface. A slightly damp microfiber cloth is enough for regular maintenance.
Is the hood noisy for daily use?
The noise level is around 56 dB at maximum speed, which remains moderate. Lower speeds are quieter, ideal for everyday use.
What should I do if the hood does not turn on?
First check the proper electrical connection and the condition of the power cable. If the problem persists, contact Zephyr customer service for a diagnosis.
Where can I find spare parts for this model?
You can find spare parts from Zephyr customer service or on the official online store. Always provide the full model number (ZVE-E42DS) to get the correct reference.
User questions about Venezia ZVE-E42DS Zephyr
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Venezia ZVE-E42DS - Zephyr and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Venezia ZVE-E42DS by Zephyr.
USER MANUAL Venezia ZVE-E42DS Zephyr
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zephyr
Model : Venezia ZVE-E42DS
Category : Range hood