UMBRA-1200 - Effects machine Qtx - Free user manual and instructions
Find the device manual for free UMBRA-1200 Qtx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Effects machine (fog generator) |
| Brand | Qtx |
| Model | UMBRA-1200 |
| Power Supply | 230 V AC, 50 Hz |
| Rated Power | 1200 W |
| Heating Time | Approximately 4–5 minutes |
| Fog Output | Up to 150 m³/min |
| Tank Capacity | 1.2 liters |
| Control Methods | Manual encoder and wired remote |
| Housing Material | High-strength steel with black finish |
| Dimensions | 360 × 250 × 260 mm (W×H×D) |
| Weight | 8.2 kg |
| Safety Features | Thermal overload protection and double-insulated heating element |
| Cleaning and Maintenance | Removable fluid tank for easy flushing; periodic cleaning recommended |
| Spare Parts and Repairability | Replacement parts available via Qtx service centers |
| Intended Use | Theatrical and stage fog effects |
| Remote Control Included | Wired remote with LED indicator |
| Operating Environment | Indoor use only, dry and ventilated areas |
Frequently Asked Questions - UMBRA-1200 Qtx
What fog fluid should I use with the Qtx UMBRA-1200?
Use a high-quality water-based fog fluid, preferably from Qtx or a trusted brand. Never use oil-based fluids as they can damage the heater and void the warranty.
How do I properly set up the UMBRA-1200 for the first time?
Place the machine on a flat surface, fill the tank with fog fluid, plug it into 230V AC, and allow it to heat up for 4–5 minutes. Then test via the manual button or wired remote.
Why is the machine not producing fog after heating?
Check that the tank has enough fluid, the nozzle is not clogged, and the heating time is sufficient. Also ensure the remote or manual control is pressed fully.
Can I control the fog machine via DMX?
No, the UMBRA-1200 is designed for manual and wired remote control only. It does not have a DMX port.
Is it safe to leave the machine unattended while heating?
It is safer to supervise the machine during operation. Always disconnect the power when not in use and follow safety guidelines to avoid fire hazards.
How can I clean the UMBRA-1200?
Unplug the machine, let it cool completely, and empty the remaining fluid. Rinse the tank with clean water and allow it to dry. Clean the nozzle with a soft brush if needed.
What should I do if the machine switches off unexpectedly?
It may be triggered by thermal overload. Check the ventilation openings, clear any blockages, and let it cool down before restarting. Reduce the operating time if needed.
How much fluid does the tank hold and how long does it last?
The 1.2-liter tank provides roughly 60 minutes of continuous use depending on output level. Refill when the fluid level drops below the minimum mark.
Can I use the UMBRA-1200 outdoors?
The machine is intended for indoor use only. Operating it outdoors exposes it to moisture and temperature variations, which can cause electric shock or component failure.
Where can I find replacement parts or service?
Contact the Qtx service network. Genuine spare parts such as the heating element, pump, and remote control are available through authorized dealers.
User questions about UMBRA-1200 Qtx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effects machine in PDF format for free! Find your manual UMBRA-1200 - Qtx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UMBRA-1200 by Qtx.
USER MANUAL UMBRA-1200 Qtx
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Qtx
Model : UMBRA-1200
Category : Effects machine