Moonglow DMX V2 - DJ Equipment Qtx - Free user manual and instructions
Find the device manual for free Moonglow DMX V2 Qtx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moonflower Effect Light |
| Brand | Qtx |
| Model | Moonglow DMX V2 |
| Light Source | 1 x 15W RGBW LED |
| Beam Angle | Approx. 90° |
| DMX Channels | 10 or 14 channels (selectable) |
| DMX Connection | 3-pin XLR input and output |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 20W |
| Dimensions (approx.) | 220 x 220 x 260 mm |
| Weight (approx.) | 1.5 kg |
| Housing | Metal and plastic casing |
| Cooling | Fan-cooled |
| Mounting | Hanging bracket with adjustable screw |
| Safety Features | Fuse protection, overheating cutoff |
| Cleaning | Wipe with a soft, dry cloth |
| Included Items | Power cable, mounting bracket, user manual |
| Repairability | Replacement parts available via service center |
Frequently Asked Questions - Moonglow DMX V2 Qtx
How do I set the DMX address on the Moonglow DMX V2?
To set the DMX address, press the Menu button until you reach the DMX address setting (usually shown as A001 or similar). Use the Up/Down buttons to select the desired address, then press Enter to confirm. Make sure the address matches the one configured on your DMX controller.
How can I use sound-active mode?
Press the Menu button until you see the sound-active mode option (often labeled Sound or So). Select it and adjust the microphone sensitivity if needed. The fixture will then react to music beats via its built-in microphone.
How do I connect multiple Moonglow DMX V2 units in master/slave mode?
Use DMX cables to connect the DMX output of the master unit to the DMX input of the first slave, and continue chain linking. Set the first unit to Master mode and all others to Slave mode. They will then synchronize their patterns.
What are the DMX channel functions?
In the 10-channel mode, channels typically control: 1: Pan movement, 2: Tilt movement, 3: Pan/tilt speed, 4: Macro color, 5: Red, 6: Green, 7: Blue, 8: White, 9: Strobe, and 10: Dimmer. For the 14-channel mode, additional channels may include separate control for each micro LED or fine pan/tilt. Refer to the manual for exact channel mapping.
How should I clean the lens and housing?
Disconnect the power first. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner to wipe the lens. For the housing, use a dry cloth. Avoid using abrasive materials or solvents, as they can damage the fixture.
Why is my Moonglow DMX V2 not responding to the DMX controller?
Check that the DMX cables are properly connected and not damaged. Verify that the DMX address is correctly set and does not conflict with other fixtures. Ensure the termination switch (if present) is set correctly on the last unit. Also, confirm the controller is sending data and the fixture is in DMX mode.
What fuse type does the Moonglow DMX V2 require?
The fuse is typically a 2A 250V slow-blow fuse. Always replace with the same rating to avoid damage. If the fuse repeatedly blows, there may be an internal fault; contact a qualified technician.
Can I mount the Moonglow DMX V2 upside down?
Yes, the fixture can be mounted in any orientation using the included hanging bracket. Ensure the bracket is securely tightened and the safety cable is attached. The fan vents must remain unobstructed to prevent overheating.
How do I reset the fixture to factory defaults?
Press and hold the Menu button for about 5 seconds until the display shows Rst or Default. Release the button and confirm by pressing Enter. This will reset all settings to their factory values.
What regular maintenance is required?
Regularly inspect the unit for dust buildup and clean the fan and vents every few months. Check DMX and power cables for wear. Update to an overvoltage protection to extend lifespan. Have a qualified technician inspect internal components annually.
User questions about Moonglow DMX V2 Qtx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Moonglow DMX V2 - Qtx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Moonglow DMX V2 by Qtx.
USER MANUAL Moonglow DMX V2 Qtx
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Qtx
Model : Moonglow DMX V2
Category : DJ Equipment