CG903DLPGB4 - Cooker Fisher & Paykel - Free user manual and instructions
Find the device manual for free CG903DLPGB4 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Cooktop |
| Brand | Fisher & Paykel |
| Model | CG903DLPGB4 |
| Product Family | 90 cm |
| Dimensions (W x D x H) | 900 x 530 x 70 mm |
| Cutout Dimensions | 880 x 480 mm |
| Weight | 17 kg |
| Gas Type | Natural Gas / LPG |
| Number of Burners | 5 |
| Burner Power Ratings | Wok: 5.5 kW, Semi-rapid: 2.8 kW (x2), Auxiliary: 1.0 kW (x2) |
| Ignition System | Electronic spark ignition |
| Safety Device | Thermostatic flame failure protection |
| Control Knobs | Front mounted, ergonomic handles |
| Body Material | Stainless steel with black glass surface |
| Cooking Grates | Cast iron pan supports and wok ring |
| Cleaning | Removable grates and knobs for easy cleaning |
| Electrical Supply | 220-240 V AC, 50/60 Hz |
| Gas Supply Pressure | NG: 2.0 kPa, LPG: 2.75 kPa |
| Conversion Kit | Included for LPG |
| Installation Type | Built-in / flush mount |
| Certifications | CE / EN 30-1-1 |
Frequently Asked Questions - CG903DLPGB4 Fisher & Paykel
How do I install the CG903DLPGB4 cooker into my countertop?
The cutout dimensions are 880 x 480 mm. Ensure a clearance of at least 50 mm from the sides and 100 mm from the back to heat-sensitive walls. Seal the edges with the included gasket and fix the cooker using the bracket.
What type of gas can be used?
The cooktop is compatible with both Natural Gas (NG) and Liquid Petroleum Gas (LPG). It comes pre-configured for NG; an LPG conversion kit is included.
How do I connect the cooktop to the gas supply?
Use a flexible hose conforming to local regulations. The gas inlet connection is a 1/2 inch BSP fitting. Ensure you install an isolation valve in the line for safety.
Why won't the burner ignite?
First check that the power supply is connected and the spark plugs are clean. Remove food residue. If the flame fails, the thermocouple may be faulty. Clean the electrode and the thermocouple tip with a soft cloth.
How do I clean the cooktop?
Wait until the surface cools. Remove the cast iron pan supports and control knobs. Wash them in warm soapy water. Clean the glass surface with a non-abrasive cleaner and avoid using sharp objects.
What is the maximum output of the wok burner?
The wok burner provides up to 5.5 kW, ideal for high-heat stir-frying. It has a triple-ring flame for even heat distribution.
What safety equipment is included?
Each burner is protected by a flame failure device that automatically shuts off the gas if the flame goes out, preventing gas leaks.
How can I convert the cooktop to LPG?
Follow the instructions in the manual: replace the burner nozzles with the ones in the LPG conversion kit and adjust the minimum flame setting using the bypass screws. This should be done by a qualified gas technician.
Can I use the cooktop with a wok without a special ring?
A special wok ring is included to stabilize large round-bottomed woks on the wok burner. Do not use flat-bottomed woks larger than 30 cm.
What are the electrical requirements for the ignition?
The igniter requires a 220-240 V AC supply at 50/60 Hz. The maximum power draw for the spark system is 0.5 W.
User questions about CG903DLPGB4 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual CG903DLPGB4 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CG903DLPGB4 by Fisher & Paykel.
USER MANUAL CG903DLPGB4 Fisher & Paykel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fisher & Paykel
Model : CG903DLPGB4
Category : Cooker