DG5251 - Camera Rigol - Free user manual and instructions
Find the device manual for free DG5251 Rigol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Function / Arbitrary Waveform Generator |
| Brand | Rigol |
| Model | DG5251 |
| Number of Channels | 2 |
| Sine Bandwidth | 50 MHz |
| Sample Rate | 250 MSa/s |
| Vertical Resolution | 14 bits |
| Maximum Output Amplitude | 10 Vpp into 50 Ω |
| Waveform Types | Sine, Square, Ramp, Pulse, Arbitrary |
| Display | 7-inch TFT LCD |
| Connectivity | USB, LAN, GPIB (optional) |
| Dimensions (W x H x D) | 232 mm x 108 mm x 295 mm |
| Weight | 4.2 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 40 W (typical) |
| Operating Temperature | 0 °C to 50 °C |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Safety | Use a grounded power outlet; do not operate with covers removed |
| Repairability | Calibration and repair should be performed by authorized Rigol service centers |
| General Information | Comes with USB cable and power cord |
Frequently Asked Questions - DG5251 Rigol
How do I generate a sine wave on the DG5251?
Press the Sine softkey on the front panel. Then set the frequency and amplitude using the numeric keypad or the knob and arrow keys. Finally, enable the output by pressing the Output button.
How can I set the frequency and amplitude precisely?
Use the numeric keypad to enter the desired value directly. Select the appropriate unit using the softkeys (e.g., Hz, kHz, mV, V). For even finer adjustment, rotate the knob to change the highlighted digit.
How do I connect the DG5251 to a PC for remote control?
Connect the instrument to your PC via USB or LAN. Install the Rigol UltraSigma software or use standard SCPI commands through a terminal program. The corresponding drivers can be downloaded from the Rigol website.
Can I update the firmware of the DG5251?
Yes, firmware updates are available from Rigol. Download the latest firmware file from the Rigol support site. Save it to a USB flash drive, insert it into the instrument, and navigate to Utility > Firmware Update to perform the upgrade. Do not power off during the process.
How can I create arbitrary waveforms?
Use the Arb function and edit the waveform points either on the front panel or via the UltraStation software. You can also import waveform data from a CSV file through the USB or LAN interface.
How do I use the sweep function?
Press the Sweep key, then choose the sweep type (linear, logarithmic, etc.). Set the start and stop frequencies, sweep time, and trigger source. The output will step through the specified range automatically.
How can I synchronize the two channels?
Both channels can be coupled in frequency and phase. Use the Channel menu to enable Phase Lock and set the phase offset. This ensures the two outputs maintain a constant phase relationship.
What is the maximum output voltage of the DG5251?
The maximum amplitude is 10 Vpp into a 50 Ω load, or 20 Vpp into a high-impedance load. Be careful to avoid exceeding the rated output to prevent damage.
How do I perform a self-calibration?
Go to Utility > Calibration and select Self Cal. Connect a BNC cable from the output to the input of the same channel if required. The process is automatic and takes a few minutes. It is recommended to perform self-calibration periodically for accuracy.
What safety precautions should I follow when using the DG5251?
Always use a grounded power cord and connect to an earthed outlet. Do not operate with the cover removed. Avoid touching exposed connectors when the output is enabled. Follow the safety instructions in the manual to prevent electric shock or damage.
User questions about DG5251 Rigol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual DG5251 - Rigol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DG5251 by Rigol.
USER MANUAL DG5251 Rigol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rigol
Model : DG5251
Category : Camera