N843A82 - Video recorder Lorex - Free user manual and instructions
Find the device manual for free N843A82 Lorex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4K 8-Channel Network Video Recorder |
| Brand | Lorex |
| Model | N843A82 |
| Video Input | 8 PoE channels |
| Recording Resolution | Up to 4K (3840 x 2160) |
| Video Compression | H.265 / H.264 |
| Audio Support | Yes with compatible cameras |
| Storage | 2TB SATA HDD pre-installed |
| Display Output | HDMI (4K), VGA |
| Network Interface | 10/100/1000 Mbps Ethernet |
| USB Ports | 2x USB 2.0 |
| PoE Ports | 8x 10/100 Mbps PoE |
| Power Supply | 48V DC, 5A |
| Power Consumption | ≤ 30W |
| Operating Temperature | -10°C to 55°C |
| Dimensions | 380mm x 250mm x 45mm |
| Weight | 2.5 kg |
| Remote Access | Lorex Cloud app (iOS/Android) |
| Security | Admin password protection |
| Compatibility | Works with all Lorex IP cameras |
| Warranty | 1-year limited |
Frequently Asked Questions - N843A82 Lorex
How do I set up the N843A82 recorder?
Connect your Lorex IP cameras to the PoE ports on the back panel, then plug in the power adapter and connect the recorder to your network via Ethernet. Follow the setup wizard on the screen to configure the system.
Can I access my recordings remotely?
Yes, download the Lorex Cloud app on your iOS or Android device, add the N843A82 to your account, and view live or recorded footage from anywhere with an internet connection.
What is the maximum storage capacity of the N843A82?
The recorder comes with a 2TB internal HDD and supports expansion via external storage devices such as USB or eSATA drives, allowing you to increase your recording capacity.
How do I set up motion detection on my recorder?
Go to Menu > Recording > Motion on the recorder interface. Select the camera, enable motion detection, and adjust the sensitivity and detection area as needed.
My cameras are not being detected by the N843A82. What should I do?
Check all PoE connections and ensure the cameras are powered. Restart the recorder by unplugging it for 10 seconds. If the issue persists, verify the cameras are compatible and try rebooting the network.
Can I use third-party IP cameras with this recorder?
The N843A82 is optimized for Lorex cameras, but supports ONVIF protocol, so many third-party IP cameras can be added by manually entering their IP address and credentials.
How do I perform a factory reset on the N843A82?
Press and hold the reset button on the back or bottom of the unit for about 10 seconds, or go to Menu > Settings > System and choose 'Restore to Factory Defaults'.
Does the recorder support 4K video output?
Yes, connect a 4K monitor or TV to the HDMI port to enjoy full 4K resolution playback and live viewing, provided your cameras output 4K signals.
How can I update the firmware of the N843A82?
Download the latest firmware from the Lorex support website onto a USB drive, insert it into the recorder, and go to Menu > Settings > System and choose 'Update Firmware'. You can also enable auto-update over the network.
What is the warranty period for this product?
The Lorex N843A82 comes with a 1-year limited warranty, covering defects in materials and workmanship under normal use.
User questions about N843A82 Lorex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual N843A82 - Lorex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N843A82 by Lorex.
USER MANUAL N843A82 Lorex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lorex
Model : N843A82
Category : Video recorder