ProHeat 1887 - Vacuum Cleaner BISSELL - Free user manual and instructions
Find the device manual for free ProHeat 1887 BISSELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Upright Carpet Cleaner |
| Brand | BISSELL |
| Model | ProHeat 1887 |
| Color | Red/Black |
| Dimensions (L x W x H) | 22.5 x 12.5 x 15.5 inches (57 x 32 x 39 cm) |
| Weight | 16.5 lbs (7.5 kg) |
| Power Supply | 120V, 60Hz |
| Power Consumption | 900W |
| Cord Length | 25 ft (7.6 m) |
| Clean Water Tank Capacity | 1.5 gallons (5.7 L) |
| Dirty Water Tank Capacity | 1.5 gallons (5.7 L) |
| Cleaning Technology | HeatWave technology for consistent water temperature |
| Brush Type | Rotating brush rolls for deep cleaning |
| Brush Speed | 1200 RPM |
| Included Attachments | Upholstery nozzle, stair tool, deep reach tool |
| Additional Functions | Built-in water heater, spray trigger, easy touch controls |
| Maintenance | Clean brush and filters regularly; use BISSELL cleaning formula |
| Safety | Do not operate with wet hands; unplug when cleaning; keep away from water sources |
| Repairability | Replacement belts and brushes available; accessible screws for disassembly |
| Suitable Surfaces | Carpets, rugs, upholstery, and stairs |
Frequently Asked Questions - ProHeat 1887 BISSELL
How do I change the clean water tank on the BISSELL ProHeat 1887?
To change the clean water tank, first unplug the machine. Then lift the tank straight up from the back of the unit. Flip it over, remove the cap, and refill with hot tap water and the recommended BISSELL formula. Reattach the tank securely until it clicks into place.
What is the recommended cleaning formula for the ProHeat 1887?
BISSELL recommends using BISSELL ProHeat 2X formula. This formula is specifically designed for deep cleaning machines and prevents damage to the internal components. Using other brands may void the warranty and produce poor results.
Why is the brush not spinning on my BISSELL ProHeat 1887?
If the brush is not spinning, check whether the belt is broken or loose. Remove the bottom cover, inspect the belt, and if needed, replace it with a genuine BISSELL belt. Also ensure the brush roll is not jammed with debris.
How often should I perform maintenance on my carpet cleaner?
After every use, empty and rinse the dirty water tank. Check the brush and filters for tangled hair or debris weekly. Replace the belt and brushes when they show signs of wear, typically every 6-12 months depending on usage.
Can I use the ProHeat 1887 on upholstery?
Yes, the ProHeat 1887 comes with an upholstery nozzle that lets you clean couches, chairs, and other fabric surfaces. Always test the cleaning solution on a small, hidden area first and use the tool with a gentle back-and-forth motion.
How do I deep clean my stairs using this device?
Use the stair tool included with the machine. Place the tool directly on the stair surface, spray the warm water and formula mix, then slowly run the tool backward to extract the dirt and moisture. Repeat until the stain is gone.
How do I clean the dirty water tank after use?
Remove the dirty tank, open the lid, and empty it into a sink or toilet. Rinse thoroughly with clean water. Leave the lid off and allow the tank to air dry completely before reattaching it to the machine.
What does the HeatWave technology do?
The HeatWave technology works by continuously drawing hot water from the tank through the pump and heater to keep the cleaning solution at a consistent temperature. This helps break down tough dirt and stains more effectively while cleaning.
How do I store the machine after cleaning?
Empty both tanks, wipe down the exterior and brush area with a damp cloth, and allow it to air dry. Wind the power cord around the cord hooks. Store the unit upright in a dry, climate-controlled area to prevent damage to hoses and tanks.
Why is water leaking from the machine?
Water leaks often occur when the tank seals are not properly aligned or the lid is not closed tight. Check the rubber gaskets for debris or damage, and ensure both tanks are seated correctly in their bases.
User questions about ProHeat 1887 BISSELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual ProHeat 1887 - BISSELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProHeat 1887 by BISSELL.
USER MANUAL ProHeat 1887 BISSELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BISSELL
Model : ProHeat 1887
Category : Vacuum Cleaner