TW300-E5/PI4 - Server ASUS - Free user manual and instructions
Find the device manual for free TW300-E5/PI4 ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Tower server |
| Dimensions (W x H x D) | 431 x 198 x 450 mm |
| Weight | 15 kg |
| Power supply | 500W single power supply |
| Processor support | Intel Xeon E5 series |
| Chipset | Intel C602 |
| Memory | 8 DIMM slots, DDR3 ECC up to 128 GB |
| Drive bays | 4 x 3.5-inch hot-swap |
| RAID support | RAID 0, 1, 5, 10 |
| Expansion slots | PCI Express 3.0 x16 / x8 |
| Network | Dual Gigabit Ethernet |
| Management | ASWM (ASUS System Web Management) |
| Cooling | High-efficiency system fans |
| Front I/O | USB 2.0, status LEDs |
| Power input | 100-240V AC |
| Operating temperature | 10°C to 35°C |
| Maintenance | Tool-less drive bays, removable fan modules |
| Security | Chassis intrusion detection |
| Repairability | CRU design for fans and power supply |
| General information | RoHS compliant, rack conversion kit supported |
Frequently Asked Questions - TW300-E5/PI4 ASUS
What operating systems are compatible with the ASUS TW300-E5/PI4 server?
The server supports Windows Server and major Linux distributions such as Red Hat Enterprise Linux and Ubuntu Server. Ensure the latest BIOS and drivers are installed for optimal performance.
How do I reset the BIOS/CMOS password?
Power off the server, open the chassis, and move the CMOS jumper on the motherboard to the clear position for 5-10 seconds. Alternatively, remove the CMOS battery for 10 minutes. Restore the jumper and reboot.
What is the maximum memory capacity?
The server has 8 DIMM slots supporting DDR3 ECC memory. The maximum capacity is 128 GB using 16 GB modules with registered ECC.
How can I configure RAID?
Enter the BIOS setup during boot, enable the RAID controller, and use the Intel Rapid Storage Technology option to create RAID volumes. Alternatively, use the onboard or optional HBA utility.
How do I know if a hard drive fails?
Check the drive LEDs on the front panel; a red or flashing LED indicates failure. The ASWM management tool also sends alerts and logs events.
Can I use non-ECC memory?
No, this server requires registered ECC DIMMs. Unbuffered non-ECC memory is not supported and may cause boot failures.
How to update the server BIOS or firmware?
Download the latest version from ASUS support website, place the file on a USB drive, and use the ASUS EZ Flash utility in BIOS to flash. Or use the DOS-based flash tool for advanced control.
What is the default administrator password?
The default ASWM login is username admin and password admin. Change it immediately to ensure security.
How do I replace a failed power supply?
Shut down the server and disconnect the power cable. Remove the top cover, unscrew the PSU, disconnect its wiring, and slide it out. Install the new PSU in reverse order.
How should I clean the server internals?
Use a can of compressed air to remove dust from fans, heatsinks, and components. Avoid vacuum cleaners and never use liquid cleaners. Clean the front air filters monthly.
User questions about TW300-E5/PI4 ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual TW300-E5/PI4 - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TW300-E5/PI4 by ASUS.
USER MANUAL TW300-E5/PI4 ASUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASUS
Model : TW300-E5/PI4
Category : Server