BTi34 - Headphones Valore - Free user manual and instructions
Find the device manual for free BTi34 Valore in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wireless Bluetooth Headphones |
| Model | BTi34 |
| Brand | Valore |
| Form factor | Over-ear, adjustable headband |
| Dimensions (folded) | 18.0 x 16.0 x 8.0 cm |
| Weight | 220 g |
| Battery capacity | 300 mAh |
| Playback time | Up to 15 hours |
| Charging time | Approximately 2 hours |
| Charging port | Micro USB |
| Bluetooth version | 5.0 |
| Wireless range | Up to 10 meters |
| Driver size | 40 mm |
| Impedance | 32 Ohms |
| Frequency response | 20 Hz – 20 kHz |
| Built-in microphone | Yes |
| Controls | Volume, track skip, play/pause, call answer/end |
| Compatibility | Smartphones, tablets, computers with Bluetooth |
| Maintenance | Wipe with soft dry cloth; do not use liquids |
| Safety | Do not expose to moisture or extreme temperatures |
| Spare parts and reparability | Ear pads and cables replaceable; contact support |
| General information | User manual available for free in PDF |
Frequently Asked Questions - BTi34 Valore
How do I pair the Valore BTi34 headphones with my phone?
Turn on the headphones by holding the power button until the LED indicator flashes red and blue. Enable Bluetooth on your phone, select BTi34 from the available devices, and confirm pairing.
How long does the battery last on a full charge?
The built-in 300 mAh battery provides up to 15 hours of playback time depending on volume level and usage.
Can I use the headphones while they are charging?
It is not recommended to use the headphones while charging. Always charge them fully before use to ensure optimal performance and battery longevity.
What is the wireless range of the BTi34?
The Bluetooth 5.0 connection supports a range of up to 10 meters (33 feet) in open spaces, but walls and obstacles may reduce this range.
How do I reset the headphones if they stop responding?
To reset, turn off the headphones, then press and hold the power button for 10 seconds until the LED flashes red quickly. They will then reconnect to previously paired devices.
How do I clean the ear cushions properly?
Detach the ear cushions if possible and wipe them with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water, but avoid getting moisture into the speaker mesh.
Are the ear pads replaceable?
Yes, the ear pads are replaceable. You can obtain compatible replacements from Valore customer support or authorized retailers. Refer to the manual for removal instructions.
Can I use these headphones with a wired connection?
The BTi34 is designed as a wireless Bluetooth headphone and does not include a 3.5mm auxiliary cable. It operates solely over Bluetooth.
How many devices can I connect at the same time?
The headphone supports multipoint connection to two devices simultaneously, allowing you to switch between calls and media easily.
Why does the sound cut in and out?
Sound interruptions can be caused by distance from the source, obstacles, or low battery. Ensure the source device is within range and fully charged. Also, try forgetting the pairing and re-pairing.
User questions about BTi34 Valore
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual BTi34 - Valore and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTi34 by Valore.
USER MANUAL BTi34 Valore
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Valore
Model : BTi34
Category : Headphones