039-8054-4 - Pressure washer Simoniz - Free user manual and instructions
Find the device manual for free 039-8054-4 Simoniz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pressure washer |
| Brand | Simoniz |
| Model | 039-8054-4 |
| Power source | Electric corded |
| Voltage | 120 V |
| Motor power | 13 A |
| Maximum pressure | 1800 PSI |
| Flow rate | 1.4 GPM |
| Hose length | 20 ft |
| Power cord length | 20 ft |
| Nozzle system | 3 quick-connect nozzles |
| Detergent tank | Integrated 0.5 L soap reservoir |
| Pump type | Axial cam pump |
| Weight | 27.5 lb |
| Dimensions (L x W x H) | 15.7 x 12.4 x 33.5 in |
| Safety features | Trigger lock, thermal overload protection |
| Included accessories | Gun, lance, 3 nozzles, hose |
| Maintenance | Clean filters, flush after each use |
| Repairability | Spare parts available directly from Simoniz |
| Warranty | 2 years limited |
Frequently Asked Questions - 039-8054-4 Simoniz
What type of oil does the pump require?
This electric pressure washer has a sealed pump that does not require oil changes. Regularly check for leaks and keep the pump dry.
Can I use hot water with this pressure washer?
No, only cold water is suitable. Using hot water can damage the pump and void the warranty.
How do I connect the high-pressure hose?
Attach the hose to the outlet port on the unit and tighten by hand. Then connect the lance and gun to the other end via the quick-connect fitting.
What nozzles are included and when should I use them?
The package includes 0° (high-pressure pinpoint), 25° (wide spray for cleaning), and foam (detergent application). Use 0° for tough stains, 25° for general washing, and foam for soaping.
How do I use the detergent function?
Fill the detergent tank with a Simoniz-approved cleaning solution. Attach the foam nozzle, trigger the gun, and apply soap evenly. Rinse with clear water using the 25° nozzle.
Why won't the motor start?
Check that the unit is plugged into a working outlet and the power switch is on. If the motor hums but doesn't start, wait for the thermal overload protector to reset, which can take up to 5 minutes.
How should I store the pressure washer after use?
Turn off the water supply and disconnect the hose. Drain all water from the pump and hose by running the unit briefly without water. Store in a dry, frost-free place.
Can I use bleach or other harsh chemicals?
No, only pressure washer safe detergents are recommended. Harsh chemicals can corrode seals and damage the pump, leading to leaks.
How do I clean the inlet filter?
Unscrew the water inlet fitting, remove the mesh filter, and rinse it under running water. Reinstall it before each use to prevent debris from entering the pump.
Is it safe to wash my car with this pressure washer?
Yes, but use the 25° nozzle and keep the lance at least 12 inches from the surface. Avoid focusing on a single spot for too long to prevent paint damage.
User questions about 039-8054-4 Simoniz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 039-8054-4 - Simoniz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 039-8054-4 by Simoniz.
USER MANUAL 039-8054-4 Simoniz
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Simoniz
Model : 039-8054-4
Category : Pressure washer