FS490SNE - Freezer Point - Free user manual and instructions
Find the device manual for free FS490SNE Point in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freezer |
| Brand | Point |
| Model | FS490SNE |
| Net volume | 490 liters |
| Energy efficiency class | A++ |
| Annual energy consumption | 290 kWh |
| Climate class | SN-T |
| Noise level | 40 dB |
| Temperature setting | Manual thermostat |
| Defrosting | Manual |
| Interior lighting | Yes |
| Lockable lid | Yes |
| Included baskets | 2 |
| Refrigerant | R600a |
| Dimensions (W x D x H) | 1500 x 750 x 850 mm |
| Net weight | 65 kg |
| Power supply | 220-240 V, 50 Hz |
| Spare parts availability | 7 years |
| Repairability score | 8/10 |
| Maintenance | Clean condenser coils annually |
Frequently Asked Questions - FS490SNE Point
What is the ideal temperature setting for the FS490SNE freezer?
For optimal food preservation, set the thermostat so the internal temperature is -18°C or lower. This prevents bacterial growth and maintains food quality.
How often should I defrost the FS490SNE freezer?
Defrost when the frost layer reaches 5 mm thickness. Depending on usage, this usually happens every 6 to 12 months. Turn off the freezer, remove food, and let ice melt naturally.
How do I clean the interior of my Point freezer?
Unplug the freezer and remove all food baskets. Clean with a solution of warm water and mild detergent. Avoid abrasive products. Rinse with clean water and dry thoroughly before restarting.
Why is my FS490SNE freezer making loud noises?
Some noise is normal, caused by the compressor and refrigerant fluid. Ensure the freezer is level and not in contact with walls or furniture. If noise persists excessively, contact service.
What installation clearances are required for the freezer?
Leave at least 10 cm clearance at the rear and sides, and 20 cm above for proper ventilation. Install on a solid, level floor away from direct sunlight and heat sources.
Can I replace the door seal of the FS490SNE myself?
Yes, the door seal is a spare part available from Point service. Remove the old seal and press the new one into the groove. Ensure a tight fit to maintain efficiency.
How do I change the interior light bulb?
Unplug the freezer first. Remove the light bulb cover, replace the defective bulb with an identical E14 LED (or specified type), and refit the cover.
Why is my freezer not freezing sufficiently?
Check that the thermostat is set correctly, the door closes tightly, and the condenser is clean. Also verify that the air vents are not blocked. If all else fails, contact support.
Can this freezer be placed in a garage or outbuilding?
The FS490SNE has a climate class SN-T, allowing operation from 10°C to 43°C. It is therefore suitable for unheated rooms, but avoid extremely cold temperatures below 10°C.
How should I transport the Point FS490SNE freezer?
Always keep the freezer in an upright position. If tilted, wait at least 2 hours before powering on to let the refrigerant settle.
User questions about FS490SNE Point
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Freezer in PDF format for free! Find your manual FS490SNE - Point and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS490SNE by Point.
USER MANUAL FS490SNE Point
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Point
Model : FS490SNE
Category : Freezer