POWK5803 - Uncategorized Point - Free user manual and instructions
Find the device manual for free POWK5803 Point in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power tool (angle grinder) |
| Brand | Point |
| Model | POWK5803 |
| Power Supply | Corded electric, 220-240V |
| Rated Power | 1800 W |
| No-load Speed | 6000 RPM |
| Disc Diameter | 180 mm |
| Spindle Thread | M14 |
| Dimensions (L x W x H) | 350 x 180 x 220 mm |
| Weight | 5.1 kg |
| Main Functions | Cutting, grinding, and polishing |
| Operation Mode | Handheld with side handle |
| Safety Features | Safety guard, double insulation, lock-off switch |
| Maintenance | Clean with dry cloth, inspect power cord regularly |
| Spare Parts Availability | Replacement carbon brushes and switch available |
| Repairability | Modular design allows easy access to internal components |
| Included Accessories | Cutting disc, grinding disc, side handle, wrench |
| Certifications | CE compliant |
| Warranty | 24 months |
Frequently Asked Questions - POWK5803 Point
How do I replace the disc on the Point POWK5803?
To replace the disc, first unplug the tool. Press the spindle lock to hold the shaft still, then use the supplied wrench to loosen the flange nut. Remove the old disc, place the new disc on the spindle, and tighten the flange nut while holding the spindle lock. Ensure the disc is correctly positioned and the safety guard is in place before use.
What safety precautions should I take when using this grinder?
Always wear protective goggles, gloves, and ear protection. Make sure the guard is correctly mounted and the tool is unplugged during disc changes. Keep the power cord away from the cutting area and avoid sparks. Do not use damaged discs, and maintain a firm grip on both handles.
How often should I clean the POWK5803 and what is the best method?
Clean the tool after each use to prevent dust buildup. Use a dry cloth or a soft brush to remove debris from the housing and ventilation slots. Do not use water or harsh chemicals. Periodically, a gentle compressed air can blow out dust from the motor area.
Can you cut metal with the Point POWK5803?
Yes, the POWK5803 is suitable for cutting metal, steel, and stone when fitted with the appropriate disc. Use a cutting disc for metal or a diamond disc for stone. Always ensure the disc type matches the material and follow the maximum RPM rating on the disc.
How do I replace the carbon brushes?
Unplug the tool. Locate the brush caps on the side of the motor housing. Use a screwdriver to remove the caps, then pull out the old brushes. Insert new brushes with the same dimensions and grade, ensuring they slide exactly into place. Replace the caps and the tool is ready for use after a short break-in period.
What is the correct operating speed for different materials?
The no-load speed is 6000 RPM. For metals, use a high speed setting (near maximum) for efficient cutting. For plastic or softer materials, reduce speed by using a variable speed feature if available, or reduce pressure. Always refer to the disc manufacturer's recommended RPM range to avoid overheating.
Why does the tool overheat and shut off?
Overheating can be caused by excessive pressure, blunt discs, or blocked ventilation slots. The thermal overload protector will shut off the tool automatically. Allow it to cool down, clean the vents, and check the disc. Restart after a few minutes. If it persists, the tool may need servicing.
Can I use a diamond blade with the POWK5803?
Yes, a diamond blade can be used for cutting tile, brick, or stone. Ensure the diamond blade is rated for 180 mm diameter and has a maximum speed above 6000 RPM. Use a wet or dry blade as appropriate, and always wear a dust mask because cutting produces fine particles.
How should I store the angle grinder when not in use?
After cleaning, store the POWK5803 in a dry place away from moisture. Keep the power cord loosely coiled and avoid wrapping it tightly around the tool. Remove the disc to prevent accidental damage, and keep the tool out of reach of children.
How do I maintain the tool for long service life?
Regularly inspect the power cord, plug, and switch for wear. Replace worn carbon brushes promptly. Lubricate the gearbox every 20-30 hours of heavy use using a lithium-based grease. Keep the spindle thread clean and apply a light anti-seize to prevent seizing of the flange nut.
User questions about POWK5803 Point
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual POWK5803 - Point and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWK5803 by Point.
USER MANUAL POWK5803 Point
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Point
Model : POWK5803
Category : Uncategorized