AP1600R-E2(BA2) - Server ASUS - Free user manual and instructions
Find the device manual for free AP1600R-E2(BA2) ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U Rack |
| Brand | ASUS |
| Model | AP1600R-E2(BA2) |
| Processor Support | Dual Intel Xeon (Socket 604) |
| Chipset | Intel E7520 |
| Memory | 8 DDR2 DIMM slots, up to 16GB ECC |
| Storage Bays | 4 x Hot-swap SATA/SAS bays |
| Expansion Slots | 1 x PCI Express x8, 1 x PCI-X 64-bit/100MHz |
| Networking | Dual Broadcom Gigabit Ethernet |
| Management | ASUS ASMB3 remote management, IPMI 2.0 |
| Power Supply | 650W Redundant (1+1) |
| Cooling | 4 x High-speed redundant fan modules |
| Dimensions (WxDxH) | 426 x 635 x 43.5 mm |
| Weight | 14.5 kg |
| Power Consumption | Approx. 50W (idle) to 350W (max) |
| Operating Temperature | 10°C to 35°C |
| Safety Certifications | UL, CE, FCC, CSA |
| Care & Cleaning | Use compressed air to remove dust from fans and heat sinks; clean air vents monthly; avoid liquid cleaners. |
| Spare Parts & Repairability | Replacement hot-swap drives, power supplies, and fans are available through ASUS service centers. |
| General Information | Designed for high-performance computing and enterprise data centers. |
Frequently Asked Questions - AP1600R-E2(BA2) ASUS
What type of processor does the ASUS AP1600R-E2(BA2) support?
It supports two Intel Xeon processors with Socket 604, paired with the Intel E7520 chipset for reliable server performance.
How can I upgrade the memory?
The server has 8 DIMM slots for DDR2 ECC memory. Install matched pairs to enable dual-channel operation. Maximum capacity is 16GB.
How do I install a hot-swap hard drive?
Open the front bezel, pull the release lever on an empty drive bay, insert the drive carrier with a SATA or SAS disk, and push it in until it clicks. The LED will indicate status.
What operating systems are compatible with this server?
The AP1600R-E2 supports Windows Server 2003/2008, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and other major x86 OS versions.
How can I configure a RAID array?
Use the integrated RAID controller (e.g., LSI) and press Ctrl+M during POST to enter the configuration utility. Follow the prompts to create arrays from attached disks.
How do I reset the BIOS password?
Turn off the server, remove the power cord, then use a jumper (labeled CLRTC) to clear the CMOS. Alternatively, remove the motherboard battery for 30 seconds to reset all BIOS settings.
What does the status LED on the front panel mean?
The dual-color LED indicates system status: green for healthy operation, amber for warning or fault, and off when powered down. Check the system event log for details.
How to access remote management functions?
The ASUS ASMB3 management board supports IPMI 2.0 and browser-based remote monitoring. Login via the dedicated NIC's IP address to view sensors, power control, and console redirection.
How do I clean the internal components?
Turn off the server and unplug it. Use compressed air to blow out dust from fans, heat sinks, and power supply vents. Do not use a vacuum; avoid touching components with hands.
How can I replace a faulty power supply?
This model supports redundant 1+1 power supplies. Remove the failed PSU by unlatching its handle and sliding it out, then insert the new unit until it locks. The server continues running during hot-swap replacement.
User questions about AP1600R-E2(BA2) ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual AP1600R-E2(BA2) - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP1600R-E2(BA2) by ASUS.