750-D1 - Hoists Vevor - Free user manual and instructions
Find the device manual for free 750-D1 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric chain hoist |
| Brand | Vevor |
| Model | 750-D1 |
| Recommended use | Lifting loads in workshops, garages, or construction sites |
| Motor power | 750 W |
| Supply voltage | 220-240 V ~ 50 Hz |
| Lifting capacity | 500 kg |
| Lifting height | 12 m |
| Lifting speed | Approx. 5 m/min |
| Control type | Wired remote control with up and down functions |
| Lifting chain | Alloy steel chain, length 3 m |
| Housing material | Robust and corrosion-resistant steel |
| Dimensions (L x W x H) | Approx. 420 x 260 x 230 mm |
| Net weight | Approx. 18 kg |
| Protection rating | IP54 (protection against dust and splashes) |
| Safety features | Automatic brake, limit switch, hook with safety latch |
| Maintenance | Check the condition of the chain and hooks before each use; lubricate moving parts regularly |
| Cleaning | Unplug the unit and wipe with a clean, dry cloth |
| Repairability | Spare parts available: remote control, chain, hooks, switches |
| General information | Delivered with mounting bracket and assembly instructions |
Frequently Asked Questions - 750-D1 Vevor
How to install the Vevor 750-D1 hoist?
Securely mount the bracket on a sturdy beam or rail. Hang the hoist on the bracket using the provided hooks. Connect the remote control and plug the unit into a 220-240 V outlet. Make sure the load does not exceed 500 kg before use.
What is the maximum lifting capacity?
The maximum lifting capacity is 500 kg. It is imperative to never exceed this load to avoid any risk of breakage or accident.
How to maintain the lifting chain?
Inspect the chain before each use: look for deformed, cracked, or rusted links. Clean and lubricate the chain with a suitable lubricant. Replace it if it shows signs of wear.
What to do if the hoist does not start?
Check the electrical supply, the power cable, and the remote control. Check the circuit breaker and the outlet. If the problem persists, unplug the unit and contact a qualified professional.
Can this hoist be used outdoors?
The hoist has an IP54 protection rating, it resists dust and water splashes. However, for outdoor use, protect the remote control and electrical connection from bad weather.
How to replace the remote control?
Unplug the hoist, remove the old remote control by disconnecting its connector, then plug in the new compatible remote control. Check proper operation before lifting any load.
What is the lifting speed?
The lifting speed is approximately 5 meters per minute, allowing controlled and safe lifting of loads.
How to avoid overloads?
Check the weight of the load before lifting and use a dynamometer if necessary. Never exceed the indicated capacity of 500 kg and distribute the load properly on the hook.
What safety instructions must be followed?
Wear gloves and safety shoes. Never stand under a suspended load. Regularly check the fastenings and cables. Use the hoist only with a stable and properly secured load.
How to store the hoist after use?
Unplug the unit, clean it with a dry cloth, fold the chain, and store the hoist in a dry, dust-free place. Avoid humid or corrosive atmospheres.
User questions about 750-D1 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hoists in PDF format for free! Find your manual 750-D1 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 750-D1 by Vevor.
USER MANUAL 750-D1 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : 750-D1
Category : Hoists