MCD25D1 - Cooler Vevor - Free user manual and instructions
Find the device manual for free MCD25D1 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vevor |
| Model | MCD25D1 |
| Product type | Automatic ice maker |
| Daily production | 25 kg of ice cubes in 24 hours |
| Storage capacity | 16 kg of ice cubes |
| Power supply | 220-240 V, 50 Hz |
| Power | 200 W |
| Dimensions | 450 × 330 × 680 mm |
| Weight | 25 kg |
| Refrigerant | R600a |
| Control panel | Digital display |
| Ice cube types | Standard solid cubes |
| Production cycle | Programmable with timer |
| Maintenance and cleaning | Regular cleaning of the tank and filters |
| Safety | Automatic shutdown in case of failure |
| Exterior material | Stainless steel |
| Included accessories | Ice basket, scoop, drain hose |
| Spare parts | Available on request from customer service |
| General information | French manual included, with troubleshooting guide |
Frequently Asked Questions - MCD25D1 Vevor
How do I clean my ice maker?
Unplug the appliance and empty the tank. Clean the interior with a soft cloth and warm soapy water. Rinse thoroughly and dry before next use. Avoid abrasive products.
What type of water should I use to make ice cubes?
Preferably use filtered water or demineralized water to avoid limescale. Tap water can be used, but it may leave deposits in the machine.
How long does it take to produce the first ice cubes?
The first cycle typically takes 20 to 30 minutes. Subsequent cycles are faster once the machine has cooled down.
The machine makes noise. Is this normal?
Yes, a slight hum and refrigerant circulation noises are normal. If the noise becomes excessive, check that the machine is level and stable.
What should I do if the machine stops making ice?
First check the power supply and that the tank has enough water. If the problem persists, clean the tank and lines to remove blockages, then restart.
Can I use the machine without a water connection?
Yes, this model works with manual filling. Pour water into the tank up to the indicated line; the machine stops automatically when the level is too low.
Where should I place the machine for optimal operation?
Place it on a flat, stable surface, more than 10 cm from walls to ensure good ventilation. Avoid direct heat sources and exposure to sunlight.
How do I store ice cubes if the bin is full?
The storage bin is removable. You can transfer the ice cubes into bags or an airtight container in the freezer. The maximum capacity is 16 kg.
What maintenance is required for internal parts?
Clean the air filters every two weeks. Descale the water circuit with a solution of white vinegar and water every 1 to 3 months depending on water hardness.
Can I adjust the size of the ice cubes?
Some models allow adjusting the thickness of the ice cubes via the control panel. Consult the manual to see if this option is available on the MCD25D1 and how to change it.
User questions about MCD25D1 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooler in PDF format for free! Find your manual MCD25D1 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MCD25D1 by Vevor.
USER MANUAL MCD25D1 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : MCD25D1
Category : Cooler