JC-S3C101410-12LR-318 - Sink Vevor - Free user manual and instructions
Find the device manual for free JC-S3C101410-12LR-318 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Stainless steel kitchen sink |
| Brand | Vevor |
| Model | JC-S3C101410-12LR-318 |
| Material | 304 stainless steel |
| Finish | Brushed |
| Number of basins | 1 basin |
| Installation type | Drop-in |
| Dimensions (L x W x D) | 1010 x 410 x 210 mm |
| Drain diameter | 90 mm |
| Steel thickness | 1.2 mm |
| Weight | 12 kg |
| Power supply | None |
| Main functions | Large basin, integrated overflow, drain included |
| Advantages | Scratch and heat resistant |
| Care and cleaning | Clean with a soft cloth and soapy water |
| Safety | Rounded edges to prevent injuries |
| Box contents | Sink, drain kit, sealing gaskets |
| Spare parts | Drain and overflow replaceable |
| Repairability | Requires standard silicone seal |
| General information | 1-year manufacturer warranty, French manual available |
Frequently Asked Questions - JC-S3C101410-12LR-318 Vevor
How to install this Vevor sink?
Installation is done by embedding the sink in a pre-cut opening. Apply silicone sealant around the perimeter, place the sink, then secure the provided mounts. Connect the drain and overflow according to the diagram provided in the manual.
What are the exact dimensions of the model JC-S3C101410-12LR-318?
The sink measures 1010 mm long, 410 mm wide, and 210 mm deep. The recommended cutout is 980 x 380 mm for optimal support.
Is the sink delivered with the drain and overflow?
Yes, the complete drain kit includes the drain, the overflow, and the gaskets. It is ready to install.
Which faucet is compatible with this sink?
The drain hole accepts a standard faucet of 35 mm. It is compatible with most single-handle or two-handle kitchen faucets.
How to clean the sink without leaving marks?
Use a non-abrasive sponge and a diluted dish soap. Rinse with clean water and dry with a microfiber cloth to maintain the shine of the brushed finish. Avoid bleach and scouring powders.
Is the bottom of the sink soundproofed?
Yes, soundproofing pads are attached under the basins to reduce the noise of water and dishes. The adhesive strips also ensure stability.
What safety precautions should be taken during installation?
Wear protective gloves when handling the sharp stainless steel. Check that the worktop can support the weight of the sink (12 kg). Ensure the cutout is perfectly clean to avoid leaks.
What to do if the drain leaks?
Check the tightening of the drain nuts and the alignment of the gaskets. Apply sanitary silicone on the threads during reassembly. If the leak persists, replace the sealing gasket with a new one of the same size.
Can this sink be installed on a granite worktop?
Yes, it is suitable for granite, quartz, stainless steel, or wood worktops. The cutout must be made with an appropriate hole saw and to prevent chipping, use a guide and masking tape.
How to maintain the brushed finish over time?
To revive the finish, gently rub in the direction of the brushing with a fine scouring pad and a little baking soda. Rinse and dry immediately. Do not use acidic products.
User questions about JC-S3C101410-12LR-318 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sink in PDF format for free! Find your manual JC-S3C101410-12LR-318 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JC-S3C101410-12LR-318 by Vevor.
USER MANUAL JC-S3C101410-12LR-318 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : JC-S3C101410-12LR-318
Category : Sink