HBS-12 - Cutting machine Vevor - Free user manual and instructions
Find the device manual for free HBS-12 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Horizontal Metal Cutting Band Saw |
| Brand | Vevor |
| Model | HBS-12 |
| Cutting Capacity (Round) | 12 inches (305 mm) |
| Cutting Capacity (Square) | 12 x 12 inches (305 x 305 mm) |
| Blade Size | 54 x 1 x 0.035 inches (1372 x 25.4 x 0.9 mm) |
| Blade Speed | Variable, 50 to 120 m/min |
| Motor Power | 1.5 HP (1100 W) |
| Power Supply | 110 V / 220 V, switchable |
| Weight | 180 kg (approx. 397 lbs) |
| Dimensions (L x W x H) | 1300 x 600 x 1100 mm |
| Coolant System | Flood coolant pump included |
| Cutting Angle | Bevel cuts up to 45 degrees |
| Feed Control | Hydraulic-controlled descent |
| Operation Mode | Manual or automatic feed via hydraulic system |
| Safety Features | Emergency stop button, blade guard |
| Maintenance | Regular blade inspection, gear lubrication |
| Cleaning | Remove metal chips after each use |
| Spare Parts | Available from manufacturer or authorized dealer |
| Repair | Repairable with standard tools, parts available online |
| General Information | Free manual available on Notice-Facile.com |
Frequently Asked Questions - HBS-12 Vevor
How do I change the band saw blade?
To change the blade, first disconnect the power and allow the machine to completely stop. Open the blade guards and release the tension knob. Remove the old blade, install the new one with the teeth pointing downward, and re-tension according to the settings in the manual. Always ensure the blade tracking is adjusted properly before use.
What type of coolant should I use?
Use a water-soluble cutting fluid or a general-purpose metalworking coolant. Mix it with water according to the manufacturer's recommendations. Regular use of coolant extends blade life and improves cutting quality.
How do I adjust the cutting speed?
The HBS-12 features a variable speed control, usually located on the control panel. Turn the dial to choose a speed between 50 and 120 m/min. Use lower speeds for harder materials like steel, and higher speeds for softer metals like aluminum.
What safety precautions should I take?
Always wear safety glasses and work gloves. Keep hands away from the cutting area and never open the blade guards while the machine is running. Use the emergency stop button immediately in case of any abnormal situation.
How do I make angled cuts?
Loosen the locking handle on the saw frame and pivot the head to the desired angle, up to 45 degrees. Tighten the handle securely and check the alignment with a protractor before starting the cut.
How often should I lubricate the gears?
Lubricate the gearbox and moving parts every 50 operating hours or at least once a month. Use a high-quality grease recommended for band saw gearboxes to reduce friction and prevent wear.
What is the maximum cutting capacity?
The maximum cutting capacity is 12 inches (305 mm) for round stock and 12 x 12 inches (305 x 305 mm) for square stock. For rectangular shapes, the capacity is determined by the shorter dimension.
Can this saw cut stainless steel?
Yes, the HBS-12 can cut stainless steel. Use a bi-metal blade designed for stainless and select a lower cutting speed (around 50 m/min) with a steady feed pressure and adequate coolant flow to prevent overheating.
How do I clean the machine after use?
After each use, shut off the power and remove all metal chips with a brush or vacuum. Wipe down the table and blade area with a clean cloth. Check the coolant level and top it up if needed. This prevents chip buildup and keeps the machine safe.
Where can I find replacement parts?
Replacement parts are available from Vevor's official website or through authorized dealers. You can also search for compatible parts using the model number HBS-12. Always use genuine parts to ensure proper fit and performance.
User questions about HBS-12 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cutting machine in PDF format for free! Find your manual HBS-12 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HBS-12 by Vevor.
USER MANUAL HBS-12 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : HBS-12
Category : Cutting machine