YH3-J-30 - Table Vevor - Free user manual and instructions
Find the device manual for free YH3-J-30 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hydraulic lift table |
| Brand | Vevor |
| Model | YH3-J-30 |
| Load capacity | 300 kg |
| Platform dimensions | 815 x 500 mm |
| Minimum height | 300 mm |
| Maximum height | 900 mm |
| Net weight | 75 kg |
| Material | Robust steel with epoxy paint |
| Control | Manual hydraulic control with pedal |
| Lifting system | Hydraulic cylinder with built-in pump |
| Wheels | 2 swivel wheels with brakes, 2 fixed wheels |
| Main function | Lifting and lowering heavy loads |
| Recommended use | Workshops, warehouses, production lines |
| Safety | Anti-lowering safety valve, overload protection |
| Maintenance | Regular check of oil level and fixing components |
| Cleaning | Wiping with a dry cloth, avoid abrasive products |
| Spare parts | Available on request from customer service |
| Repairability | Hydraulic seal kit and wear parts available |
| Documentation | User manual in French included |
| Warranty | 12 months against manufacturing defects |
| Compliance | CE certified |
Frequently Asked Questions - YH3-J-30 Vevor
How to assemble the lift table?
Assembly is simple: attach the wheels to the frame, install the platform on the cylinder and tighten the screws. Refer to the manual, detailed diagrams included.
What is the maximum load capacity?
The maximum capacity is 300 kg. Never exceed this load to avoid any risk of hydraulic failure or tipping.
How to bleed the hydraulic circuit?
Open the bleed screw on the cylinder, operate the pedal several times with no load, then close it. This removes air bubbles from the system.
How to adjust the height of the table?
Use the pedal to raise; lower by gently turning the descent knob. The adjustment is progressive and precise.
How to maintain the wheels?
Regularly check the wear of the tires and lubricate the bearings with a universal lubricant. Tighten the mounting bolts if necessary.
What to do in case of an oil leak?
Stop use immediately, identify the source of the leak (seal, hose) and replace the defective parts with the seal kit available.
Can the table be used on an inclined floor?
No, the table must be used on a flat and stable floor. An inclined surface may compromise its stability and cause tipping.
What is the warranty?
The warranty is 12 months against manufacturing defects, from the date of purchase. Wear parts are not covered.
Where to find spare parts?
Contact Vevor customer service via their website or your retailer. Parts like wheels, seals, and cylinders are available.
How to clean the table?
Use a dry or slightly damp cloth to remove dust. Do not use corrosive products that could damage the paint.
User questions about YH3-J-30 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Table in PDF format for free! Find your manual YH3-J-30 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YH3-J-30 by Vevor.
USER MANUAL YH3-J-30 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : YH3-J-30
Category : Table