RP8626 - Paint gun Vevor - Free user manual and instructions
Find the device manual for free RP8626 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric paint spray gun |
| Brand | Vevor |
| Model | RP8626 |
| Power supply | 220-240 V, 50 Hz |
| Power | 650 W |
| Reservoir capacity | 1000 ml |
| Paint flow rate | Up to 800 ml/min |
| Adjustable spray width | Yes, from 0 to 200 mm |
| Recommended viscosity | 20-25 DIN-s |
| Cable length | Approximately 1.8 m |
| Dimensions (L×W×H) | 38 × 26 × 33 cm |
| Weight | 1.6 kg |
| Pump type | Oil-free turbine pump |
| Nozzle | 2.5 mm brass nozzle |
| Main features | Adjustable flow rate and spray pattern, variable trigger, safety lock |
| Recommended uses | Paint, varnish, wood stains, walls and furniture |
| Maintenance and cleaning | Clean immediately after use with the appropriate solvent |
| Safety | Disconnect before any intervention, wear a protective mask |
| Spare parts | Nozzle, needle, seal and valve available separately |
| Repairability | Cleaning and replacement of wear parts possible without special tools |
| General information | Supplied with graduated cup, cleaning brush and funnel |
Frequently Asked Questions - RP8626 Vevor
How to prepare the paint before using it?
Dilute the paint with the appropriate solvent (water for acrylic paint, white spirit for alkyd paint) until you obtain a viscosity of about 20 to 25 DIN-s. Filter the paint with a paint filter to remove any lumps.
How to adjust the spray width?
Turn the rear knob to adjust the spray width from 0 to 200 mm. The trigger also allows you to modulate the paint flow rate according to the pressure applied.
How to clean the spray gun after use?
Empty the excess paint, pour cleaning solvent into the reservoir and spray until the liquid comes out clear. Then disassemble the nozzle and needle to brush them with the supplied cleaning brush.
What is the motor power?
The motor develops a power of 650 watts, allowing regular and homogeneous spraying of medium-viscosity paints.
Can water-based paint be used with this device?
Yes, the spray gun accepts water-based paints (acrylic, latex) provided they are diluted with about 10-20% water and filtered before use.
What to do if the paint does not come out or if the spray is jerky?
Check that the nozzle and needle are not clogged with dry residues. Clean them with the solvent. Also make sure the paint is fluid enough and that the reservoir is properly attached.
How to maintain the nozzle to avoid blockages?
After each use, remove the nozzle and immerse it in a suitable solvent. Use a pin or fine brush to remove deposits in the orifice. Regularly check the wear of the nozzle seal.
What safety instructions should be followed?
Always disconnect the device before cleaning. Wear a respiratory protection mask, gloves and goggles. Work in a ventilated room and keep away from any ignition source.
Where to find spare parts for the RP8626?
Wear parts such as the nozzle, needle, seal and valve are available from Vevor customer service or online sales platforms. Use the model number RP8626 to identify compatible parts.
What is the maximum capacity of the reservoir and what to do if it is not enough?
The reservoir has a capacity of 1000 ml, which is suitable for most jobs. For large surfaces, refill it or use a pumping lance if your model allows it.
User questions about RP8626 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual RP8626 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RP8626 by Vevor.
USER MANUAL RP8626 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : RP8626
Category : Paint gun