HDB-200C - Fan Vevor - Free user manual and instructions
Find the device manual for free HDB-200C Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fan |
| Brand | Vevor |
| Model | HDB-200C |
| Ventilation type | Floor fan |
| Blade diameter | 45 cm |
| Power | 60 W |
| Power supply | 220-240 V ~ 50 Hz |
| Adjustable height | From 90 to 130 cm |
| Oscillation | Automatic, 90° |
| Number of speeds | 3 |
| Operating modes | Normal, natural, night |
| Timer | From 1 to 7 hours |
| Remote control | Yes |
| LED display | Yes |
| Maximum noise level | 60 dB |
| Chassis material | ABS and metal |
| Net weight | 5.2 kg |
| Dimensions (L x W x H) | 40 x 40 x 130 cm |
| Cable length | 1.5 m |
| Safety | Protective grille, tip-over detector |
| Maintenance | Clean the blades with a soft, dry cloth |
| Included accessories | Remote control, instruction manual |
Frequently Asked Questions - HDB-200C Vevor
How do I assemble the HDB-200C fan?
To assemble the fan, start by screwing the foot to the base, then insert the central pole. Next, attach the motor to the pole and screw on the front and rear protective grilles. Tighten all screws and check stability. The detailed steps are in the manual.
How do I use the remote control?
Insert two AAA batteries into the remote control. Use the buttons to turn on/off, adjust the speed, activate oscillation, and set the timer. Aim at the sensor on the control panel from a maximum distance of 5 meters.
How do I adjust the height of the fan?
The height is adjusted by unscrewing the locking ring on the central pole. Adjust to the desired height, then firmly retighten the ring to secure the position.
How do I clean the fan?
Always unplug the device before cleaning. Use a soft, damp cloth to wipe the blades, grille, and base. Avoid harsh chemicals and never immerse the device in water. Regular cleaning extends the motor's lifespan.
Is the fan stable and safe?
The fan features a non-slip base and a tip-over detector that automatically cuts the power if it falls. The protective grille prevents any contact with the moving blades, ensuring safe use.
Can the oscillation function be adjusted?
Yes, press the OSC button on the remote control or control panel to activate or deactivate the 90° oscillation. This allows air to be distributed throughout the room.
What is the power consumption of the fan?
The rated power is 60 W. When running continuously at full speed for 8 hours, the consumption is about 0.48 kWh, which corresponds to a modest cost on your electricity bill.
Is the fan noisy?
At minimum speed, the noise level is about 45 dB, ideal for a bedroom. At maximum speed, it reaches 60 dB, which remains acceptable for regular use. Night mode further reduces noise.
What should I do if the remote control doesn't work?
First check the battery status and replace them if necessary. Make sure you are within 5 meters and point the remote control at the receiver. If the problem persists, use the manual buttons on the panel to control the fan. Contact customer service if the failure continues.
Where can I find spare parts for this fan?
Spare parts such as the remote control, grille, motor, or base can be ordered from Vevor customer service. The fan is designed to be repairable: the removable components can be easily replaced.
User questions about HDB-200C Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual HDB-200C - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDB-200C by Vevor.
USER MANUAL HDB-200C Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : HDB-200C
Category : Fan