DB40 - Ice Maker Vevor - Free user manual and instructions
Find the device manual for free DB40 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Professional ice cube machine |
| Brand | Vevor |
| Model | DB40 |
| Daily production | 40 kg / 24 h |
| Storage capacity | 20 kg |
| Dimensions (W x D x H) | 400 x 420 x 680 mm |
| Net weight | 32 kg |
| Power supply | 220-240 V, 50 Hz |
| Rated power | 280 W |
| Refrigerant | R290 |
| Housing material | Stainless steel and ABS plastic |
| Cooling mode | Air cooling |
| Ice cube shape | Cubes |
| Cycle time | Approximately 15-20 min |
| Adjustable thermostat | Yes |
| Self-cleaning function | Yes |
| Safety system | Protection against overheating and pressure |
| Daily maintenance | Drain the bin and clean the water circuit |
| Spare parts | Available on request |
| Repairability | Electrical diagrams and troubleshooting guide included |
| Warranty | 1 year |
Frequently Asked Questions - DB40 Vevor
What is the daily production of the Vevor DB40 ice cube machine?
The Vevor DB40 ice cube machine produces up to 40 kg of ice cubes in 24 hours and can store approximately 20 kg in its integrated bin.
How to install and put the ice cube machine into service?
Install the appliance on a flat and stable surface, connect the water inlet hose, plug the machine into a 220-240 V outlet, then press the start button. The first ice cubes are ready in approximately 20 minutes.
How to clean and descale the ice cube machine?
It is recommended to clean the machine every two weeks. Use a solution of water and white vinegar to descale the internal circuit, then rinse thoroughly with clean water. Do not rub the surfaces with abrasive sponges.
What to do if the machine does not produce ice cubes?
First check that the machine is properly supplied with water and that the tap is open. Then check the ambient temperature (must be between 10 and 32°C). Clean the condenser if necessary and make sure the production mode is activated.
What type of water is best for ice cube production?
Tap water is suitable, but to limit scale and extend the appliance's lifespan, it is advisable to use filtered or softened water.
Is it possible to adjust the size of the ice cubes?
Yes, the control panel allows you to adjust the duration of the production cycle, which influences the size of the ice cubes. Consult the manual to choose the appropriate setting.
Can the machine operate in an unheated room?
The manufacturer recommends an ambient temperature between 10 and 32°C for correct operation. Below 10°C, production may be disrupted, and above it will be less efficient.
What to do in case of a water leak?
Immediately cut off the water and electrical supply. Check the inlet hose connections, the bin door seal, and the drain hose. Replace any damaged part before restarting the machine.
Where can I find spare parts for the DB40 model?
Spare parts are available from Vevor customer service or on the official online store. Provide the DB40 model number to get the correct reference.
What is the power consumption of the machine?
The power is approximately 280 W, i.e. an average consumption of 6.7 kWh per 24 hours in continuous operation, but it varies according to temperature and frequency of opening.
User questions about DB40 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice Maker in PDF format for free! Find your manual DB40 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DB40 by Vevor.
USER MANUAL DB40 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : DB40
Category : Ice Maker