ACD 1810 - Uncategorized AL-KO - Free user manual and instructions
Find the device manual for free ACD 1810 AL-KO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill driver |
| Brand | AL-KO |
| Model | ACD 1810 |
| Battery voltage | 18 V |
| Battery type | Lithium-ion |
| Battery capacity | 2.0 Ah (common estimate) |
| Chuck | Metal, quick release, 10 mm |
| Number of speeds | 2 |
| No-load speed | 0-450 / 0-1500 rpm |
| Maximum tightening torque | 30 Nm |
| Number of torque positions | 20 + 1 drilling position |
| Drilling capacity (wood) | Up to 25 mm |
| Drilling capacity (steel) | Up to 10 mm |
| Lighting | Integrated LED |
| Handle | Ergonomic with rubber coating |
| Weight (without battery) | Approximately 1.4 kg |
| Power supply | 18 V battery (not included, sold separately) |
| Care and cleaning | Clean with a dry cloth, avoid solvents |
| Safety | Safety brake, spindle lock |
| Spare parts and repairability | Available from AL-KO customer service |
| General information | 2-year manufacturer's warranty |
Frequently Asked Questions - ACD 1810 AL-KO
How do I charge the battery of the AL-KO ACD 1810?
Connect the supplied charger to the battery and to a power outlet. The battery is fully charged when the charger indicator turns green. Remove the battery from the charger after charging.
How do I install and remove the battery?
To insert the battery, slide it into the compartment at the base of the handle until it clicks into place. To remove it, press the release button and pull it out.
How do I use the drill driver in screwdriving mode?
Set the torque ring to the desired position (1 to 20). Use a slow speed (1) for driving screws and a fast speed (2) for removing them. Press the trigger gently to control the speed.
How do I drill into wood or metal?
Set the ring to the drilling position (drill symbol). Select the appropriate speed: 1 for wood, 2 for metal. Use a suitable drill bit and apply moderate pressure.
What is the function of the integrated LED?
The integrated LED illuminates the work area when you press the trigger. It makes working in dark areas easier and turns off automatically after releasing the trigger.
How do I change drill bits or accessories?
Rotate the chuck counterclockwise to open the jaws, insert the accessory, then tighten the chuck clockwise. Make sure the accessory is well centered and securely fastened.
How do I adjust the tightening torque?
Turn the torque ring located behind the chuck. The numbers indicate the torque level: a low number for small screwdriving tasks, a high number for hard surfaces. The drilling symbol disables the torque clutch.
Which battery does the ACD 1810 use?
The device uses an AL-KO 18V lithium-ion battery, typically 2.0 Ah. Check compatibility with your AL-KO charger. The batteries are removable and replaceable.
How do I maintain the drill to make it last?
After each use, clean the exterior with a dry cloth. Regularly check the chuck tightness and the condition of the carbon brushes (if accessible). Store the device in a dry place away from moisture.
Where can I find spare parts for the AL-KO ACD 1810?
Spare parts (chuck, switch, battery, etc.) are available from AL-KO after-sales service or on the official website. Use the model number ACD 1810 to identify compatible parts.
User questions about ACD 1810 AL-KO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ACD 1810 - AL-KO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACD 1810 by AL-KO.
USER MANUAL ACD 1810 AL-KO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AL-KO
Model : ACD 1810
Category : Uncategorized