FMW 45 CL G - Uncategorized FRANKE - Free user manual and instructions
Find the device manual for free FMW 45 CL G FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | FRANKE |
| Model | FMW 45 CL G |
| Product type | Wall-mounted extractor hood |
| Width | 45 cm |
| Depth | 29 cm |
| Height | 60 cm |
| Net weight | 8 kg |
| Electrical supply | 220-240 V ~ 50 Hz |
| Maximum power | 180 W |
| Number of speeds | 3 speeds |
| Maximum air flow | 420 m³/h |
| Maximum noise level | 65 dB |
| Lighting | 2 integrated LEDs |
| Filter type | Aluminum grease filters |
| Number of filters | 2 filters |
| Control | Electronic control panel |
| Installation | Wall mounting, external exhaust |
| Exhaust duct diameter | 150 mm |
| Operating mode | Extraction, recirculation possible with charcoal filter |
| Filter maintenance | Hand wash or dishwasher |
| Lighting replacement | Non-replaceable LED, contact technical service |
| Safety | Automatic shut-off after 12 hours |
| Repairability | Filters and motor accessible, spare parts available |
| General information | Designed for a modern kitchen, glass and stainless steel finish |
Frequently Asked Questions - FMW 45 CL G FRANKE
How to install the FMW 45 CL G hood?
The hood must be securely fixed to the wall at a distance of 65 to 75 cm above the cooking surface. Use the drilling template provided and comply with local electrical standards. Make sure the 150 mm exhaust duct is properly connected.
How to clean the grease filters?
The aluminum grease filters should be cleaned every month. Wash them by hand with hot water and detergent, or in a dishwasher at a low temperature. Let them dry thoroughly before reinstalling.
When should the charcoal filter be replaced?
If the hood operates in recirculation mode, the charcoal filter should be replaced every 3 to 6 months depending on use. It is not washable and must be ordered as a spare part.
How to change the LED lighting?
The LEDs on the FMW 45 CL G hood are integrated and not user-replaceable. In case of lighting failure, contact Franke after-sales service for technical intervention.
What exhaust duct should be used?
Use a rigid or flexible duct of 150 mm diameter, preferably aluminum or PVC. Avoid too many bends to maintain good airflow.
Can the hood operate in recirculation mode?
Yes, an activated charcoal filter (optional) can be installed for recirculation mode. In this case, the air is filtered and then returned to the kitchen.
How to adjust the ventilation speeds?
The control panel offers 3 speeds. Press the V+ button to increase and V- to decrease. The 3rd speed is recommended for heavy cooking vapors.
What to do if the hood does not turn on?
First check the electrical outlet and the circuit breaker. Then make sure the control is not in standby mode. If the problem persists, the motor or the variable speed drive may be defective, contact a professional.
How to reduce the noise of the hood?
Clean the grease filters regularly, as a dirty filter increases noise. Also use rigid ducts rather than flexible ones to reduce vibrations.
Where to find spare parts for the FMW 45 CL G?
Spare parts such as filters, the control, or the motor are available from authorized Franke dealers. You can also consult the online manual for references.
User questions about FMW 45 CL G FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FMW 45 CL G - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FMW 45 CL G by FRANKE.
USER MANUAL FMW 45 CL G FRANKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRANKE
Model : FMW 45 CL G
Category : Uncategorized