EKG20100OK - Uncategorized ELECTROLUX - Free user manual and instructions
Find the device manual for free EKG20100OK ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freestanding gas cooker |
| Model | EKG20100OK |
| Brand | Electrolux |
| Energy type | Natural gas (G20) / LPG (G30/G31) |
| Number of burners | 4 |
| Burner types | 1 rapid, 2 semi-rapid, 1 auxiliary |
| Oven capacity | 58 litres |
| Oven functions | Conventional gas oven and grill |
| Ignition | Automatic battery ignition |
| Safety features | Flame failure device on hob and oven |
| Cleaning & maintenance | Removable oven door, enamelled cavity |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
| Weight | 48 kg |
| Installation type | Freestanding |
| Controls | Push-in safety knobs |
| Interior oven light | Yes |
| Storage compartment | Yes |
| Electrical supply | 220-240 V, 50 Hz |
| Adjustable feet | Yes |
| Spare parts availability | Genuine Electrolux spare parts |
Frequently Asked Questions - EKG20100OK ELECTROLUX
How do I light the gas burners on my Electrolux EKG20100OK?
Turn the control knob to the maximum position, press it down to activate the automatic ignition (a spark), then hold for 3-5 seconds after flame appears. If no spark, check the battery or clean the spark plug.
Can I use LPG instead of natural gas in this cooker?
Yes, the cooker is convertible to LPG with a conversion kit. Contact an authorized service centre or qualified technician to adjust the burner nozzles and minimum gas flow.
Why does the flame extinguish when I release the knob?
This is due to the flame failure device (thermocouple). Keep the knob pressed for 5-10 seconds after lighting until the thermocouple heats up. If it still fails, clean the thermocouple or adjust the gas pressure.
How do I clean the oven interior?
Use a damp cloth with mild detergent. Do not use abrasive pads. The enamelled surface is easier to clean. Always cool down the oven before cleaning. The door can be removed for better access.
How can I replace the oven door gasket?
Order a genuine gasket and remove the old one by pulling it from the groove. Clean the groove, press the new gasket into place, and ensure the seal is uniform. Check for any gaps.
Does the oven have a thermostat?
Yes, a gas thermostat maintains the set temperature. Turn the oven knob to the desired temperature, usually between 150°C and 250°C.
How often should I clean the burners?
Clean the burner caps and heads regularly to avoid blocked flame openings. Use a toothbrush to unclog small holes. Make sure they are dry before reassembling.
What electrical supply is needed?
The ignition and oven light require a 220-240V AC supply. The appliance must be earthed. If you don't have a power supply, use a battery ignition.
Can I use an extension cable to connect the hob?
No, the cooker should be connected to a dedicated outlet. Using an extension may cause voltage drop or overheating. This is also a safety risk.
Where can I find spare parts?
Genuine parts are available from Electrolux authorized service centres or online. Quote the model number (EKG20100OK) and the part code for accurate ordering.
User questions about EKG20100OK ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EKG20100OK - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKG20100OK by ELECTROLUX.