AGS1901 - Refrigerator AEG - Free user manual and instructions
Find the device manual for free AGS1901 AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Refrigerator |
| Brand | AEG |
| Model | AGS1901 |
| Total capacity | 90 L |
| Cooling type | Static cooling |
| Climate class | N-ST |
| Energy class | A+ |
| Noise level | 40 dB |
| Height | 85 cm |
| Width | 55 cm |
| Depth | 60 cm |
| Net weight | 28 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Power consumption | 90 W |
| Refrigerant | R600a (isobutane) |
| Operating temperature | 0°C to 8°C |
| Defrosting | Manual |
| Interior lighting | Yes, LED |
| Temperature control | Mechanical thermostat |
| Shelf material | Tempered glass |
| Reversible door | Yes |
| Adjustable feet | Yes |
| Included accessories | Crisper drawer, shelves, door bins |
Frequently Asked Questions - AGS1901 AEG
How to adjust the temperature of my AEG AGS1901 refrigerator?
Use the thermostat located inside the refrigerator. Turn it to a medium setting (3-4) for a temperature of 4°C. In summer, gradually increase until the temperature is ideal. Check with a thermometer.
How to defrost the AGS1901 refrigerator?
Turn off the appliance, remove the food, leave the door open. The frost melts naturally. Collect the water with a tray. Never use a knife or sharp object. Clean and dry before restarting.
What to do if the refrigerator no longer cools?
Check that the power outlet works and that the cord is properly plugged in. Make sure the thermostat is not set to 0. Check that the door closes properly and that the seal is intact. If the problem persists, contact a professional.
How to reverse the door opening direction?
Unscrew the upper and lower hinges, remove the door and replace it on the other side by reversing the brackets. Follow the instructions in the manual. Have a Phillips screwdriver on hand.
How to clean the inside of the refrigerator?
Unplug the appliance, remove the shelves and bins. Use a soft sponge with warm water and white vinegar. Rinse and dry. Clean the gasket with a toothbrush.
Why is there water in the drain tray?
This is normal: during the refrigeration cycle, the frost melts and water flows into the tray above the compressor. Check that the drainage hole is not blocked and clean it regularly.
How to reduce energy consumption?
Install the refrigerator away from heat sources, leave a ventilation gap, open the door briefly, check the seals. Set the thermostat to a moderate temperature (4°C).
What to do if the motor makes an abnormal noise?
Check if the appliance is level and that the motor does not touch the walls. Noises from the circulation of refrigerant are normal. If the noise is intense, turn off the appliance and contact customer service.
What are the exact dimensions for built-in installation?
For installation, allow a space of 85 cm in height, 55 cm in width and 60 cm in depth. Leave a clearance of 5 cm at the rear for ventilation.
Where to find spare parts for this appliance?
Go to the AEG website or an authorized dealer. Use the model number AGS1901 to identify the parts. Parts such as shelves, seals and thermostats are available.
User questions about AGS1901 AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual AGS1901 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AGS1901 by AEG.