SECM 12 F2 - Uncategorized SILVERCREST - Free user manual and instructions
Find the device manual for free SECM 12 F2 SILVERCREST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Espresso machine |
| Brand | SILVERCREST |
| Model | SECM 12 F2 |
| Pump pressure | 15 bar |
| Rated power | 1100 W |
| Water tank capacity | 1.2 liters |
| Device weight | 3.2 kg |
| Dimensions (W x H x D) | 32 x 28 x 24 cm |
| Main color | Stainless steel and black |
| Housing material | ABS plastic and stainless steel |
| Main functions | Espresso, cappuccino, latte macchiato, hot water |
| Integrated milk frother | Yes, swivel steam wand |
| Portafilter | Double portafilter with 1 or 2 cup filter |
| Control panel | Rotary switches for coffee and steam |
| Automatic shutdown | After 30 minutes of inactivity |
| Sound pressure level | 80 dB (estimated) |
| Power supply | 220-240 V, 50 Hz |
| Care and cleaning | Rinse the tank and steam wand after each use |
| Descaling | Every 2 to 3 months with a commercial descaling product |
| Safety | Overheating protection, portafilter lock |
| Spare parts and repairability | Filters, seals, tank and frother available on request |
| General information | Designed for domestic use, CE certified |
Frequently Asked Questions - SECM 12 F2 SILVERCREST
How do I descale my SECM 12 F2 machine?
To descale your machine, fill the tank with a mixture of water and descaling agent (often citric acid). Turn on steam mode and let it work. Then rinse thoroughly. Repeat every 2 to 3 months.
Why is my coffee cold?
If the coffee is cold, check that the cup is preheated and that the steam wand is properly closed. It is also possible that the water tank is empty or that the temperature is not optimal. Let the machine heat up for 5 minutes.
How do I clean the milk frother?
Immediately after each use, remove the steam wand and rinse it with warm water. Use a needle to unclog the orifice if necessary. For deep cleaning, follow the instructions in the manual.
What to do if the machine does not turn on?
Check that the appliance is properly plugged in and that the switch is ON. If the problem persists, check the fuse in your electrical installation. If it still fails, contact customer service.
How to prepare a cappuccino?
First prepare an espresso in a cup. Then pour cold milk into a pitcher, immerse the steam wand and froth the milk with circular movements. Pour the frothed milk over the espresso.
What type of coffee should I use?
Use finely ground, untamped coffee. You can also use ESE (Easy Serving Espresso) pods if your machine is equipped with the appropriate filter. Consult the manual.
How do I change the portafilter seal?
Remove the portafilter, then remove the seal with a flat screwdriver or your fingers. Place the new seal by pressing firmly. Check the seal after reassembly.
The machine makes an unusual noise, what should I do?
An unusual noise can come from the pump or excessive limescale. First descale the machine. If the noise persists, stop using it and contact a professional.
How do I adjust the amount of water for an espresso?
The amount of water is generally controlled by the activation time of the pump. Turn the knob to the coffee position and turn it off when you reach the desired volume. On some models, you can program the dose.
Can I use tap water?
Yes, but it is advisable to use filtered water to prevent limescale buildup. Preferably use low-calcium water. Descale the machine regularly.
User questions about SECM 12 F2 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SECM 12 F2 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SECM 12 F2 by SILVERCREST.