Heddon - Loudspeaker MARSHALL - Free user manual and instructions

Find the device manual for free Heddon MARSHALL in PDF.

MARSHALL Heddon - Loudspeaker
📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MARSHALL Heddon - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Loudspeaker
Brand Marshall
Model Heddon
Speaker Type Active bookshelf speaker
Amplifier Power 2 x 25W Class D
Frequency Response 50 Hz - 20 kHz
Maximum Sound Pressure 95 dB SPL
Crossover Frequency 2.5 kHz
Connectivity Bluetooth 5.0, RCA, 3.5mm
Dimensions (W x H x D) 200 x 160 x 120 mm
Weight 2.1 kg
Cabinet Material MDF with vinyl wrap
Drivers 1 x 4" woofer, 1 x 1" dome tweeter
Input Impedance 8 ohms
Power Supply AC 100-240V, 50/60 Hz
Power Consumption 30W
Controls Volume, Bass, Treble
Included Accessories Power cable, user manual
Recommended Placement Bookshelf or speaker stand
Protection Features Overheat and short-circuit protection

Frequently Asked Questions - Heddon MARSHALL

How do I connect my Marshall Heddon to a TV?
You can connect your TV using the RCA or 3.5mm AUX inputs on the speaker. If your TV supports Bluetooth, you can pair it wirelessly instead.
Can I use voice assistants with this speaker?
The Marshall Heddon is a traditional loudspeaker without built-in voice assistant support. However, you can connect it to a smart device that has an assistant via Bluetooth or cable.
How do I clean the speaker grille?
Use a soft dry brush or a microfiber cloth to gently remove dust from the grille. Avoid using any liquids, as they may damage the fabric.
Is the speaker portable or battery-powered?
The Heddon is a mains-powered speaker and is not designed for portable use. It requires connection to an AC outlet.
What is the warranty period for this product?
Marshall typically offers a 2-year limited warranty for consumer electronics. Please check the included warranty card or contact your retailer.
Can I connect two Heddon speakers for stereo sound?
The Heddon is a single speaker with a built-in stereo amplifier. It does not have a daisy-chain or wireless pairing feature to connect a second unit.
How do I reset the Bluetooth pairing?
To reset Bluetooth, turn off the speaker, then turn it back on and press and hold the Bluetooth button for 5 seconds until the LED flashes. The speaker will enter pairing mode.
What power cable does it use?
It uses a standard AC power cable with a C7/C8 (figure-8) connector, included in the box. The input voltage is 100-240V, so you can use it worldwide.
Can I wall-mount the speaker?
The Heddon does not have mounting holes or VESA-compatible brackets. It is designed for shelf or stand placement.
Does it support aptX codec?
No, it supports AAC and SBC Bluetooth codecs, which provide good quality for most devices, but not aptX.

User questions about Heddon MARSHALL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual Heddon - MARSHALL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Heddon by MARSHALL.

USER MANUAL Heddon MARSHALL

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MARSHALL

Model : Heddon

Category : Loudspeaker