DCD443 - Drill DEWALT - Free user manual and instructions
Find the device manual for free DCD443 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill/driver |
| Brand | DEWALT |
| Model | DCD443 |
| Category | Drill |
| Power source | 18 V battery |
| Battery type | Rechargeable 18 V battery (Ni-Cd or Li-Ion technology depending on version) |
| Voltage | 18 V |
| Chuck | 13 mm keyless chuck |
| Clamping capacity | From 1.5 to 13 mm |
| Number of speeds | 2 mechanical speeds |
| No-load speed | 0 - 550 and 0 - 1,750 rpm |
| Torque | 24 torque positions + drilling mode |
| Wood drilling capacity | Up to 30 mm |
| Steel drilling capacity | Up to 13 mm |
| Weight | Approximately 1.8 kg |
| Dimensions | 26 x 8 x 25 cm |
| Main functions | Drilling, screwdriving, forward/reverse, variable speed, spindle brake, spindle lock |
| Maintenance and cleaning | Clean with a soft cloth and blow out the ventilation openings |
| Safety | Remove the battery before any maintenance, wear personal protective equipment, hold the tool firmly |
| Spare parts and repairability | Spare parts available from DEWALT approved repairers |
| General information | Compact professional tool with ergonomic handle and belt hook |
Frequently Asked Questions - DCD443 DEWALT
How do I change the battery on my DEWALT DCD443 drill?
Press the release clip on the battery then pull it downwards. Insert the recharged battery until it clicks. Refer to the manual for precautions.
What to do if the drill does not start?
First check that the battery is charged and correctly inserted. Then check the rotation direction and the switch position. If the problem persists, contact an approved service center.
What drilling depth is possible in wood?
The drilling capacity in wood can reach 30 mm with a suitable bit. Use wood bits and an appropriate speed for a clean result.
How to adjust the torque?
Turn the adjustment ring located behind the chuck to the desired torque number (1 to 24). The higher the number, the higher the torque. For drilling, set the ring to drill mode.
What speed should I use for drilling into metal?
Use slow speed (1st gear) for metal and a higher speed for wood. Lubricate the bit and apply steady pressure.
How to maintain the chuck?
Regularly clean the chuck with a dry cloth to remove dust. Check that the bit is properly tightened before each use and do not leave the chuck open in dusty environments.
Can I use standard drill bits with this drill?
Yes, the 13 mm keyless chuck accepts cylindrical bits and drivers up to 13 mm in diameter.
What type of battery is compatible?
Use a DEWALT 18 V battery compatible with the DCD443 model. Check the type and condition of the battery before installing it.
How to reverse the rotation direction?
Use the forward/reverse selector located above the trigger. Move it left for one direction, right for the other. Never change direction while the spindle is rotating.
Where to find spare parts for the DCD443?
Spare parts are available from DEWALT authorized dealers and service centers. Specify the model number DCD443 to get the correct references.
User questions about DCD443 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DCD443 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCD443 by DEWALT.
USER MANUAL DCD443 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DCD443
Category : Drill