HPGDL 8N2B-84 - Tumble dryer HOOVER - Free user manual and instructions
Find the device manual for free HPGDL 8N2B-84 HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat pump tumble dryer |
| Brand | Hoover |
| Model | HPGDL 8N2B-84 |
| Capacity | 8 kg |
| Drying System | Heat pump with automatic sensor drying |
| Energy Efficiency Class | A++ |
| Height | 850 mm |
| Width | 600 mm |
| Depth | 600 mm |
| Weight | 52 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power Consumption | ≈ 1000 W |
| Noise Level | 65 dB (A) |
| Drum Volume | 118 L |
| Number of Programmes | 16 |
| Display | LED display with programme status |
| Sensor Drying | Yes, with moisture sensors |
| Self-Cleaning Condenser | Yes, with automatic cleaning system |
| Reverse Tumble Action | Yes, reduces tangling |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Filter Cleaning Indicator | Yes, reminder light |
| Spare Parts Availability | 10 years after launch |
| Repairability Index | 8.2 / 10 |
Frequently Asked Questions - HPGDL 8N2B-84 HOOVER
How do I clean the lint filter on my Hoover HPGDL 8N2B-84?
Open the door and pull the filter out from the lower part of the door opening. Open the filter, remove the lint with your hand, rinse under running water and dry thoroughly before reinserting. Clean the filter after every cycle for optimal performance.
How do I clean the condenser unit?
Locate the condenser accessible via the lower front panel. Open the flap, unlock the condenser handle and pull it out. Rinse with water and refit. The self-cleaning condenser reduces maintenance, but manual cleaning is recommended every 10 cycles.
Why is my dryer not drying clothes properly?
Check if the lint filter is blocked, the condenser is clean, and the drum is not overloaded. Also ensure you selected a suitable programme. For heat pump dryers, make sure the ambient temperature is not too high.
Can I install the dryer next to a washing machine?
Yes, the dryer can be placed on top of a washing machine using a stacking kit, or side by side. Ensure the space is well ventilated and that the dryer is level.
How do I set the delayed start?
Load the dryer, select a programme, then press the Delay Start button repeatedly to set the delay time (up to 24 hours). Press Start to confirm. The dryer will begin automatically after the delay.
What do the symbols on the display mean?
The display shows remaining time, child lock indicator, filter cleaning indicator, tank full indicator, and selected programme. Refer to the manual's quick guide for a complete list.
Is the dryer ventless or does it need an exhaust hose?
This is a condenser dryer with a water tank, so it is ventless. You can either empty the water container after each cycle or connect a drain hose to a floor drain.
How do I change the direction of the door?
The door is reversible. Unscrew the hinge covers, remove the door, reattach it on the opposite side, and install the hinge covers on the other side. Use a Phillips screwdriver and follow the steps in the manual.
What is the maximum load for different fabrics?
For cotton, up to 8 kg. For synthetics, up to 3.5 kg. For delicates, up to 2 kg. Always respect the load limits to avoid poor drying results and damage.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the key symbol appears on the display. To deactivate, press and hold again. This prevents accidental button presses during operation.
User questions about HPGDL 8N2B-84 HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual HPGDL 8N2B-84 - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HPGDL 8N2B-84 by HOOVER.