Aquaspeed Power FV5184 - Iron TEFAL - Free user manual and instructions
Find the device manual for free Aquaspeed Power FV5184 TEFAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Corded steam iron |
| Brand | TEFAL |
| Model | Aquaspeed Power FV5184 |
| Power rating | 2400 W |
| Water tank capacity | 270 ml |
| Continuous steam output | 35 g/min |
| Steam shot output | 140 g/min |
| Soleplate type | Durilium soleplate |
| Anti-drip system | Yes |
| Vertical steam function | Yes |
| Spray function | Yes |
| Self-cleaning function | Yes |
| Anti-scale system | Yes |
| Auto shut-off | Yes |
| Cord length | 2.5 m |
| Weight | 1.3 kg |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Included accessories | Filling cup |
| Color | White/turquoise |
Frequently Asked Questions - Aquaspeed Power FV5184 TEFAL
How do I fill the water tank of my TEFAL Aquaspeed Power FV5184?
Open the filling flap on the front of the handle. Tilt the iron slightly and fill with water using the provided measuring cup until the level reaches the MAX mark. Do not exceed the maximum capacity.
Can I use tap water in my iron?
Yes, the iron is designed for tap water. However, if your tap water is very hard, it is recommended to mix it with distilled water in a 50/50 ratio. Do not use pure distilled water or chemically softened water.
What is the steam shot function used for?
The steam shot releases a powerful burst of steam to remove stubborn creases on thick fabrics, such as denim or linen. Press the steam shot button located under the handle to activate it.
How does the anti-drip system work?
The anti-drip system prevents water from leaking onto your clothes when the iron is not hot enough. Always wait for the thermostat light to go off before using the steam functions.
How often should I descale my iron?
It depends on the hardness of your water. As a general rule, use the self-cleaning function once every two weeks. If your iron loses steam performance, descale more frequently.
How do I use the self-cleaning function?
Fill the water tank to the MAX level, set the steam control to zero and connect the iron. Heat the iron to a high temperature, unplug it, then hold it horizontally over a sink and press the self-cleaning button. Scale particles and water will be expelled. Do not use steam during this process.
Why is my iron not producing steam?
Check that the water tank is not empty and that the temperature dial is set to a high enough temperature. Also make sure the steam control is not set to zero. If the iron still does not produce steam, clean the soleplate and perform the self-cleaning function.
Can I use the iron vertically to remove creases from hanging clothes?
Yes, the vertical steam function allows you to steam curtains, garments on hangers, and upholstery. Hold the iron upright a few centimeters away from the fabric and press the steam shot button.
How should I clean the soleplate?
Ensure the iron is unplugged and cooled down. Wipe the soleplate with a damp cloth. Avoid using abrasive products or metal pads that could scratch the surface.
What does the auto shut-off do?
The auto shut-off automatically turns off the iron after 30 seconds if it is left horizontally on its soleplate and after 8 minutes if it is left standing on its heel, to ensure safety and save energy.
User questions about Aquaspeed Power FV5184 TEFAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual Aquaspeed Power FV5184 - TEFAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aquaspeed Power FV5184 by TEFAL.
USER MANUAL Aquaspeed Power FV5184 TEFAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEFAL
Model : Aquaspeed Power FV5184
Category : Iron