BK-XD06E-BL2 - Electric bike SHARP - Free user manual and instructions
Find the device manual for free BK-XD06E-BL2 SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric bike |
| Brand | SHARP |
| Model | BK-XD06E-BL2 |
| Dimensions (L x W x H) | 170 x 65 x 105 cm |
| Total weight | 23 kg |
| Battery | Lithium-ion 36V 10.4 Ah |
| Range | 40 km (in eco mode) |
| Motor | Rear hub motor 250 W |
| Maximum speed | 25 km/h |
| Assistance modes | 3 levels (eco, standard, sport) |
| Display screen | LCD with speedometer and battery level |
| Brakes | Mechanical disc brakes |
| Transmission | 7-speed rear derailleur |
| Lighting | Front and rear LED |
| Wheels | 26 inches |
| Tires | 26 x 1.95 |
| Maximum load capacity | 120 kg |
| Charging time | 5 hours |
| Recommended use | Urban commuting and leisure |
| Care and cleaning | Clean with a damp cloth, avoid high-pressure cleaner |
| Safety | Wear a helmet, obey the traffic code |
| Spare parts and repairability | Parts available online, simplified disassembly for most components |
Frequently Asked Questions - BK-XD06E-BL2 SHARP
How do I recharge the battery?
Plug the supplied charger into a standard wall outlet, then connect the cable to the 36V 10.4 Ah battery. The full charging time is approximately 5 hours. Never leave the battery charging unattended.
What range can I expect?
The range depends on the assistance mode used, the rider's weight, terrain, and wind. In eco mode, you can travel up to 40 km. In sport mode, the range drops to approximately 25 km.
How do I maintain the electric bike?
Regularly clean the frame with a damp cloth and lubricate the chain every 200 km. Check tire pressure and brake wear. Avoid cleaning with a high-pressure jet to preserve the electrical components.
What maintenance does the battery require?
To extend battery life, recharge it after each use and avoid leaving it completely discharged. Store it in a dry place at moderate temperature (15-25°C). Never disassemble it yourself.
How do I change an inner tube?
Remove the affected wheel, pry off the tire with tire levers, replace the defective inner tube with a new compatible one 26 x 1.95. Reinstall the tire, making sure the tube is not pinched.
Is the bike suitable for rain?
Yes, the bike is designed for use in light rain, but avoid heavy downpours and deep puddles. The electrical components are protected against splashes, but the control circuit is not waterproof. Dry the bike after a ride in the rain.
How do I adjust the maximum speed?
The maximum speed is limited to 25 km/h by the controller. This limit complies with European legislation for electric bikes. It is not recommended to modify it, as this would make the bike non-compliant and could damage the motor.
What should I do if the motor doesn't start?
First check that the battery is properly inserted and charged. Make sure the connector between the battery and frame is clean and securely attached. If the problem persists, consult the troubleshooting section of the manual or contact customer service.
How do I adjust the seat height?
Loosen the quick-release lever on the seat collar, adjust to the desired height, then tighten firmly. Make sure the seat post is inserted at least 5 cm into the frame.
What wear parts should I keep an eye on?
Brake pads, tires, and the chain are the parts that wear the fastest. Check them every 500 km and replace them as soon as necessary. Brake and derailleur cables should be inspected regularly.
User questions about BK-XD06E-BL2 SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric bike in PDF format for free! Find your manual BK-XD06E-BL2 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BK-XD06E-BL2 by SHARP.