392-17 - Range hood FRANKE - Free user manual and instructions
Find the device manual for free 392-17 FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | FRANKE |
| Model | 392-17 |
| Color / Finish | Stainless steel |
| Width | 900 mm |
| Height (adjustable) | 600 - 1100 mm |
| Depth | 500 mm |
| Weight | 18 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 220 W |
| Extraction Rate | 750 m³/h |
| Noise Level | 65 dB(A) at max speed |
| Number of Motors | 1 |
| Number of Speeds | 3 |
| Lighting | 2 x 2 W LED |
| Controls | Electronic push buttons |
| Filter Type | Aluminum grease filter, dishwasher-safe |
| Duct Diameter | 150 mm |
| Operating Modes | Extraction (ducted) or recirculation (with charcoal filter) |
| Safety Features | Thermal overload protection, auto shut-off timer |
| Maintenance | Clean filters monthly; wipe surfaces with soft cloth |
| Spare Parts | Filters, LED lamps, control board available from Franke |
| Installation | Professional installation recommended |
| Standards | CE compliant |
Frequently Asked Questions - 392-17 FRANKE
How often should I clean the grease filters?
Clean the grease filters at least once a month or when the saturation indicator appears. They are dishwasher-safe; place them in the dishwasher at 60°C or wash by hand in warm soapy water. Dry completely before reinstalling.
How do I replace the LED lamps?
Disconnect the hood from power first. Locate the lamp housing, remove the cover with a screwdriver, and replace the LED module with a new one of the same type (usually 2W G4). Avoid touching the lamp with bare fingers; use a soft cloth.
Can I use the hood without a duct to the outside?
Yes, use recirculation mode with an activated charcoal filter (not included). Install the charcoal filter on the motor and replace it every 3 to 6 months to maintain odor absorption.
What should I do if the hood doesn't turn on?
Check the power supply cord, circuit breaker, and ensure the voltage matches. Verify the child lock is not engaged. If the issue persists, inspect the control board or call a qualified technician.
How to reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the Filter Reset button for 3 seconds. If no button exists, disconnect power for 5 minutes and reconnect to reset the indicator.
What is the recommended installation height above a cooking surface?
Install at 65-75 cm above electric hobs and 75-80 cm above gas hobs. Always follow the installation manual and local codes for safety.
Why does the hood make a lot of noise?
Noise can come from blockages, a bent duct, or a defective motor. Clean the filters, smooth the ducting, and check for air leaks. If noise continues, contact Franke support as the motor may need replacement.
How do I connect the ductwork correctly?
Use a 150 mm duct, keep it short and straight, and avoid sharp elbows. Seal connections with aluminum tape to prevent leaks. Vent the air outdoors, not into a chimney or attic.
Are there any specific requirements for installing over a gas stove?
Maintain a height of 75-80 cm above the gas stove and ensure proper ventilation. Avoid placing the hood directly over an open flame, and follow safety regulations for gas installations.
Where can I find spare parts for my Franke hood?
Order spare parts through Franke authorized service centers. You will need your model number (392-17) when ordering. Filters, LED lamps, and control boards are commonly available.
User questions about 392-17 FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 392-17 - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 392-17 by FRANKE.